13. Test print.
Your SendKit is now connected.
To test your printer is working correctly follow the steps
below.
On a PC
Go to your Control Panel
Select Devices & Printers
Double click on the Printer
(DataMax-O’Neil w1110)
1. Select Printer from the menu bar
2. Select Properties
3. Select General
4. Select Print Test Page.
Check that your label has printed correctly. If you have any
issues with the print refer to Troubleshooting later in this
document.
12. Completing printer setup.
Select Finish to complete the wizard and begin using your
printer.
*AW32662reva*
3001 Summer St.
Stamford, CT 06926
www.pitneybowes.com
AW32662 Rev. A 05/18
©2018 Pitney Bowes Inc.
All Rights Reserved
If you’re still having trouble, then visit
support.pb.com/workstation
and select Errors & Troubleshooting.
