Caution:
Never spray or pour cleaners directly on or into feeder. Excess liquid
could harm electronic parts. Always dampen a rag with the cleaner and apply it to
parts to be cleaned.
Cleaning the Sensors
Keep two the sensors on the feeder clean. Use a Q-tip to clean the sensors. Media sensor [A] is located
under the exit guide rollers. Jam sensor [B] is located on jam sensor support.
Caution:
Do not use solvents or abrasives to clean sensors.
Replacing the Metering Segments (Sheet Separators)
Metering Segments (sheet separators) ensure separation of pieces as they are fed. They wear and must
be replaced periodically. If you experience double sheet feeding and cannot adjust the separators to
prevent it, replace them.
Pitney Bowes
User Guide October 2019
7
