e. All of the filter pick up assembly parts can be washed in a dish washer or
a pot sink. Flush out the suction tube assembly with hot water. The pick
up tube screen keeps grit and solid material from binding the pump. After
flushing the pick up tube screen check to ensure that the screen is free of
debris. After cleaning, it is very important to thoroughly dry the parts
before re-assembling. Water and oil do not mix. Water in hot oil will
cause the oil to splatter.
f. Start re-assembling the filter pick up assembly by sliding the new filter
paper on to the filter paper support rack. Ensure that the hole in the filter paper goes
over the pick up tube assembly threaded connector.
g. Fold the open end of the bag in two folds. The
first fold should be approximately 1 inch from
the end and the second should be over the edge
of the rack assembly. Approx. One Inch
h. Slide the clip screen over the folded
end of the filter paper. Ensure the opening of the
clip screen goes over the pick up tube connection.
Screw the suction tube assembly onto the threaded
connection.
i. Slide the filter pan assembly back into the filter unit and attach the pick up tube
connector to the filter unit connection.
3-2