2. When the shake time is reached the buzzer will sound and the display will display shake. The buzzer
(beeps slowly) will sound for a short time and then cancel itself.
3. The product will continue to cook until the cook time has run out. When the cook time is up the buzzer
will sound again (rapid beeping) and the product key LED will blink slower to indicate that the product is
finished cooking. Press the product key to silence the buzzer and lift the product out of the shortening.
4. The product key LED blinks slowly during the hold time and the display will show the remaining hold
time.
5. When the Hold time is up the buzzer will sound again (beep very slowly). After a short time the product
key light will go out and the buzzer will stop.
2.2.5 Shutdown
There are two shutdown modes of fryer operation, STANDBY and COMPLETE. The standby mode removes
the ability for the fryer's main burners to cycle. Complete shutdown turns off the gas supply to the fryer. Shut
down the fryer by:
STANDBY Turn fryer switch to OFF. The computer display will indicate OFF. Turn the
gas valve knob clockwise to the PILOT position. The fryer is now in
Standby and can remain this way for only brief periods of time. NEVER
leave the cooker in standby overnight.
COMPLETE To completely shut down the cooker, turn the gas valve knob clockwise to
the PILOT position. Depress the knob slightly and turn it to the OFF
position. The fryer is now completely shut down and can be cleaned and
filtered.
2.2.4 Power Failure
NOTE
No Attempts should be made to operate the fryer during power outages.
If power is removed from the fryer for any reason during operation, the unit will shutdown. Wait five minutes
after power is restored before restarting the fryer. This will give any gas fumes in the burner time to dissipate.
To restart the unit, follow the Start-up procedure as you normally would.
2-5