Pitco TB-SRTG Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 28

Pitco TB-SRTG Скачать руководство пользователя страница 5

TB-SRTG: Gas Floor Model Rethermalizer

INSTALLATION

L20-376, rev. 1 (08/18)

1

# Description

TB-SRTG

1 Cleaning brush

Standard

2 Tube Rack

Optional

3 8 Product Vertical Food Rack

Optional

4 8 Product Rack

Optional

5 6 Product Food Rack

Optional

6 Wide Product Suitcase

Optional

7 Narrow Product Suitcase

Optional

8 Tall Wide Product Suitcase

Optional

9 Tall Narrow Product Suitcase

Optional

10 Wide basket

Optional

11 Narrow Basket

Optional

12 8 Product basket

Optional

13 Gas Quick Disconnect & lanyard

Optional

14 Water Quick Disconnect & Lanyard

Optional

15 1/3 Pan Rails

Optional

16 Combo 12 Product/Tube Rack

*Standard

Accessories

1. INSTALLATION

1.1. CHECKING YOUR NEW APPLIANCE

Your new Pitco appliance has been carefully packed
into one crate. Every effort has been made to ensure
that it is delivered to you in perfect condition. As you
unpack your new appliance, inspect each of the
pieces for damage. If something is damaged, DO
NOT sign the bill of lading. Contact the shipper
immediately; the shipper is only responsible for 15
days after delivery. Check the packing list enclosed
with your appliance to ensure that you have received
all the parts to the appliance. If you are missing any
parts, contact the dealer from whom the appliance
was purchased. As you unpack the appliance and its
accessories be careful to keep the weight of the
appliance evenly distributed. Refer to the table below
to identify which accessories should be included with
your appliance.

Locate your Pitco model number and serial number
on the inner door of the appliance and the find the
date purchased. Write this information on the front
cover of this manual for future reference.

If you have completed the above steps that are applicable to the appliance you purchased, the
appliance is now ready to be installed. Although it may be possible for you to install and set up your
new appliance, it is STRONGLY recommended that you have this done by qualified professionals. A
qualified professional will ensure that the installation is safe and meets local building and fire codes.

WARNING

DO NOT sit or stand on this appliance. The appliance’s front panel, tank, splash back, tank
cover, workshelf, drain board is not a step. Serious injury could result from slipping, falling
or contact with hot liquids.

«
...
3
4
5
6
7
...
»

Содержание TB-SRTG





























Отзывы:

Нет отзывов