Pitco TB-SRTG Скачать руководство пользователя страница 2

TO THE PURCHASER, OWNER AND STORE MANAGER 

Please review these warnings prior to posting them in a prominent location for reference.

 

 

ii 

                      L20-376, rev. 1 (08/18) 

TO THE PURCHASER 

Post in a prominent location the instructions to be followed 
in the event that an operator smells gas. Obtain this 
information from your local gas supplier. 

WARNING 

DO NOT store or use gasoline or other flammable vapors and 
liquids in the vicinity of this or any other appliance. 

WARNING

 

Improper installation, alteration, service or maintenance can 
cause property damage, injury or death. Read the 
installation, operating and maintenance instructions 
thoroughly before installing or servicing this appliance. 

WARNING 

Installation, maintenance and repairs should be performed 
by a Pitco Authorized Service and Parts (ASAP) company 
technician or other qualified personnel.  Installation, 
maintenance or repairs by an unauthorized and unqualified 
personnel will void the warranty. 

WARNING 

Installation and all connections must be made according to 
national and local regulations and codes in force. 

WARNING 

During the warranty period if a customer elects to use a non-
original part or modifies an original part purchased from 
Pitco and/or its Authorized Service and Parts (ASAP) 
companies, this warranty will be void.  In addition, Pitco and 
its affiliates will not be liable for any claims, damages or 
expenses incurred by the customer which arises directly or 
indirectly, in whole or in part, due to the installation of any 
modified part and/or received from an unauthorized service 
center. 

WARNING 

This appliance, when installed, must be electrically grounded 
in accordance with local codes, or in the absence of local 
codes, with the National Electrical Code, ANSI/NFPA 70, or 
the Canadian Electrical Code, CSA C22.2, as applicable. 

WARNING 

Adequate means must be provided to LIMIT the movement or 
this appliance without depending on the  gas or electrical 
cord connection.  Single appliances equipped with legs must 
be stabilized by installing anchor straps.  All appliances 
equipped with casters must be stabilized by installing 
restraining chains. 

WARNING 

An appliance equipped with casters and a flexible gas line 
must be connected to the gas supply with a quick disconnect 
device. This quick disconnect must comply with ANSI Z24.41.  

WARNING 

DO NOT alter or remove structural material on the appliance 
to accommodate placement under a ventilation hood. 

WARNING 

This appliance is intended for professional use only and 
should be operated by fully trained and qualified personnel. 

WARNING 

If the appliance is equipped with a power cord and it is 
damaged, it must be replaced by a Pitco Authorized Service 
and Parts (ASAP) company technician, or a similarly 
qualified person in order to avoid a hazard. 

WARNING 

The power supply must be disconnected before servicing, 
maintaining or cleaning this appliance. 

WARNING 

The appliance is NOT jet stream approved.  DO NOT clean 
the appliance with a water jet. 

WARNING 

DO NOT attempt to move this appliance or transfer hot 
liquids from one container to another when the unit is at 
operating temperature or filled with hot liquids. Serious 
personal injury could result if skin comes in contact with the 
hot surfaces or liquids. 

WARNING 

DO NOT sit or stand on this appliance. The appliance’s front 
panel, tank, splash back, tank cover, workshelf, drain board 
is not a step.  Serious injury could result from slipping, 
falling or contact with hot liquids. 

WARNING 

NEVER use the appliance as a step for cleaning or accessing 
the ventilation hood.  Serious injury could result from slips, 
trips or from contacting hot liquids. 

WARNING 

The water level should be maintained at the level line.  DO 
NOT turn the appliance on until the heat tubes are fully 
covered with water at all times.  Serious injury could result 
from hot steam vapors off the heat tubes. 

WARNING 

If overflow drain is not equipped or if overflow drain stop is 
used, do not leave appliance unattended while filling with 
water.  Over filling the appliance can cause serious injuries 
and damage the equipment. 

WARNING 

Completely shut the appliance down when the water is being 
drained from the appliance. This will prevent the appliance 
from heating up during the draining and filling process.  
Serious injury can occur. 

WARNING 

This appliance is intended for indoor use only. 

WARNING 

DO NOT operate appliance unless all panels and access 
covers are attached correctly. 

WARNING 

It is recommended that this appliance be inspected by a 
qualified service technician for proper performance and 
operation on a yearly basis. 
 

WARNING 

There is an open flame inside this appliance. The unit may 
get hot enough to set nearby materials on fire. Keep the area 
around the appliance free from combustibles. 

WARNING 

DO NOT supply the appliance with a gas that is not indicated 
on the data plate. If you need to convert the appliance to 
another type of fuel, contact your dealer. 

WARNING 

DO NOT use an open flame to check for gas leaks! 

WARNING 

If gas flow to appliance is interrupted, or pilots extinguish, 
wait 5 minutes before attempting to relight the pilot to allow 
any residual gas in appliance to dissipate. 

WARNING 

Ensure that the appliance can get enough air to keep the 
flame burning correctly. If the flame is starved for air, it can 
give off a dangerous carbon monoxide gas. Carbon 
monoxide is a clear odorless gas that can cause suffocation. 

 

Содержание TB-SRTG





























Отзывы: