Pitco SSHLV Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 92

background image

Pitco SSHLV (ROV) Gas Fryers

!

DANGER

!

Improper installation, operation, adjustment, maintenance, all alterations or service, and unauthorized
alterations or modifications can cause property damage, injury or death. Read the installation, operating
and service manuals thoroughly before installing or servicing this equipment.

!

WARNING

!

DO NOT supply the appliance with a gas that is not indicated on the data plate. If conversion of the
appliance is required, contact your dealer or authorized service agent.

!

DANGER

!

Only qualified service personnel may service or convert this appliance to use a gas other than that for
which it was originally manufactured. Improper conversion can lead to property damage, injury or death.

!

DANGER

!

Prior to moving, testing, maintaining or repairing your appliance, ensure it is emptied of all oil, cool,
disconnected from gas and all electrical power. Failure to do so may result in property damage, damage
to your fryer, injury or death.

!

DANGER

!

No structural material on the fryer should be altered or removed to accommodate placement of the fryer
under a hood, or any other reason. Unauthorized modifications could cause improper combustion and
excess heat, causing property damage, injury and death.

!

DANGER

!

Adequate means must be provided to limit the movement of this appliance without depending on the gas
line. Single fryers equipped with legs must be stabilized by installing anchor straps. All fryers equipped
with casters must be stabilized by installing restraining lanyards. If a flexible gas line is in use, an
additional restraining lanyard must be connected at all times when the fryer is in use. The restraining
cable must NOT exceed 80% of the length of the flexible gas line. Failure to do so may result in ruptured
gas lines and property damage, injury and death.

!

DANGER

!

DO NOT sit or stand on this appliance. The appliance’s top deck, door, front panel, tank, splash
back, tank cover, workshelf, drain board are not steps. Serious injury will result from slipping,
falling or contact with hot liquids

causing property damage, injurious severe burns and/or death.

!

DANGER

!

NEVER use the appliance as a step for cleaning or accessing the ventilation hood. Serious
injury will result from slipping, falling or contact with hot liquids

causing property damage,

injurious severe burns and/or death.

!

DANGER

!

Do not store or use gasoline, store or spray aerosols or other flammable liquids or vapors in the vicinity
of this or any other appliance. Appliances incorporate open flames and/or high heat that will ignite
flammable vapors causing property damage, injury and death.

L22-392 R1

2

«
1
2
3
4
...
»

Содержание SSHLV Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для SSHLV Series

Бренд: Samsung Страницы: 120

Бренд: XPower Страницы: 14

Бренд: Mirta Страницы: 36

Бренд: Ariston Страницы: 24

Performa PYET244AYW

Бренд: Maytag Страницы: 28

Бренд: Maytag Страницы: 28

Бренд: SImx Страницы: 4

Family Pro-Fryer

Бренд: T-Fal Страницы: 20

Бренд: Rankam Страницы: 17

Бренд: RAMTONS Страницы: 7

Бренд: OldScool Страницы: 11

Бренд: Mediclinics Страницы: 14

Бренд: Amana Страницы: 4

Бренд: Haier Страницы: 15

Бренд: Haier Страницы: 16

Бренд: Haier Страницы: 36

Бренд: Haier Страницы: 80

Бренд: Haier Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды