background image

ENGLISH

2

SAFETY INFORMATION

MAJOR CAUSES OF APPLIANCE FIRES ARE A RESULT OF POOR MAINTENANCE AND 

A FAILURE TO MAINTAIN REQUIRED CLEARANCE TO COMBUSTIBLE MATERIALS. IT 

IS OF UTMOST IMPORTANCE THAT THIS PRODUCT BE USED ONLY IN ACCORDANCE 

WITH THE FOLLOWING INSTRUCTIONS.

Please read and understand this entire manual before attempting to assemble, operate or install the product. This will ensure 

you receive the most enjoyable and trouble-free operation of your new wood pellet grill. We also advise you retain this manual 

for future reference.

DANGERS AND WARNINGS

You must contact your local home association, building or fire officials, or authority having jurisdiction, 

to obtain the necessary permits, mission or information on any installation restrictions, such as any grill 

being installed on a combustible surface, inspection requirements or even ability to use, in your area.

1.  A minimum clearance of 914mm (36 inches) from combustible constructions to the sides of the grill, and 914mm (36 inches) 

from the back of the grill to combustible constructions must be maintained. 

Do not install appliance on combustible 

floors, or floors protected with combustible surfaces unless proper permits and permissions are obtained by 

authorities having jurisdiction. 

Do not use this appliance indoors or in an enclosed, unventilated area. This wood pellet 

appliance must not be placed under overhead combustible ceiling or overhang. Keep your grill in an area clear and free from 

combustible materials, gasoline and other flammable vapors and liquids. 

Should a grease fire occur, turn the unit OFF and leave the cabinet doors closed until the fire is out. Unplug 

the power cord from the connected outlet. Do not throw water on the unit. Do not try to smother the fire. 

Use of an all-class (class ABC) approved fire extinguisher is valuable to keep on site. If an uncontrolled fire 

does occur, call the Fire Department.

2.  Keep electrical supply cords and the fuel away from heated surfaces. Do not use your grill in the rain or around any water 

source.

3.  After a period of storage, or non-use, check the burn pot for obstructions, the hopper for foreign objects, and any air blockage 

around the fan intake or rear barrel exhaust holes. Clean before use. Regular care and maintenance is required to prolong the 

lifespan of your unit. 

If the grill is stored outside during the rainy season or seasons of high humidity, care should be 

taken to insure that water does not get into the hopper.

 When wet or exposed to high humidity, wood pellets will expand 

greatly, decompose, and may jam the feed system. Always disconnect the power, before performing any service or maintenance. 

Do not transport your grill while in use or while the grill is hot. Ensure the fire is completely out and that 

the grill is completely cool to the touch before moving. 

4.  It is recommended to use heat-resistant barbecue mitts or gloves when operating the grill. Do not use accessories not 

specified for use with this appliance. Do not put a barbecue cover or anything flammable in the storage space area under 

the barbecue.

5.  To prevent fingers, clothing or other objects from coming in contact with the auger feed system, the appliance is equipped 

with a metal safety screen, mounted to the interior of the hopper. This screen must not be removed unless directed by 

Customer Service or an authorized dealer. 

Содержание PLATINUM LAREDO 1000




































Отзывы: