6
ENG
LISH
ASSEMBLY INSTRUCTIONS
1. MOUNTING THE LEGS
Parts Required:
1
x
Fire Bowl (#11)
4
x
Leg (#14)
12 x
Screw (#A)
Installation:
•
Place a piece of cardboard on the
floor to prevent scratching the unit
and parts during assembly.
•
Mount a Leg to the Fire Bowl using
three screws through the pre-
drilled holes. Install screws from the
inside of Fire Bowl. Repeat the same
procedure for other Legs.
IMPORTANT: Do not tighten the screws
until the base ring is mounted on the
legs, then tighten all the screws.
2. ASSEMBLING THE BASE RING
Parts Required:
4
x
Base Ring (#13)
4
x
Screw (#A)
Installation:
•
Insert one Base Ring into another
and fasten them with screw. Repeat
the same procedure to install the
other two Base Rings.
IMPORTANT: Ensure all inside brackets
are facing the same direction.
ASSEMBLY PREPARATION
Parts are located throughout the shipping carton, including inside the fire bowl. Unpack the unit
and parts by removing all packaging materials. Before assembly, review all parts and reference the
parts list. If any part is missing or damaged, do not attempt to assemble. Shipping damage is not
covered under warranty. Contact your dealer or Pit Boss® Customer Care for parts.
www.pitboss-grills.com
USA: (480) 923-9630 | Canada: 1-877-942-2246
Tool required for assembly:
Phillips screwdriver (not included) and wrench (included).
1
2
11
A
A
14
13
13
13
13
14
14
14
A