ENGLISH
11
13. SECURING THE CHIMNEY
Parts Required:
1 x Chimney Gasket
(#34)
1 x Chimney Cap
(#29)
1 x Chimney Stack
(#33)
Installation:
• Locate the chimney opening on the side of the main barrel. Remove
the pre-installed screws.
• From the outside of the main barrel, secure the chimney gasket and
chimney stack to the side panel by re-installing the two screws. The
screw will fasten to the pre-mounted nut on the inside of the barrel.
• Next, secure the chimney cap onto the top of the chimney stack with
the screw and nut.
NOTE: Adjust the chimney cap to affect the airflow inside the main
grill. If cooking at low temperature, keep the cap more open. Ensure
the chimney cap allows for air to escape.
14. INSTALLING THE BOTTLE OPENER
Parts Required:
1 x Bottle Opener
(#7)
Installation:
• Remove the preinstalled screws for the bottle opener. Install the
bottle opener on the hopper.
15. PLACING THE DIFFUSER PLATE
Parts Required:
1 x Diffuser Plate
(#22)
Installation:
• First, place the diffuser plate into the bottom of the main barrel so the
central opening aligns directly with the circular fire pot on the base of
the main barrel. The diffuser plate does not require fastening to the
bottom of the main barrel or the fire pot.
13
29
33
34
14
7
15
22