12
12. INSTALLING FLAME BROILER ADJUSTING BAR
Parts Required:
1 x Flame Broiler Adjusting Bar (#5)
1 x Flame Broiler Adjusting Bar Handle (#6)
Installation:
• Insert the Flame Broiler Adjusting Bar through the opening hole on
the left side of the Main Barrel. Add the Flame Broiler Adjusting Bar
Handle on the end outside the Barrel. Next, slide the notched end of the
Adjusting Bar into the locking tab on the Flame Broiler Slider, giving you
adjustable access to the Flame Broiler Slider on the Main Plate.
13. INSTALLING THE SIDE SHELF
Parts Required:
1 x Side Table (#27)
2 x Screw (#A)
2 x Washer (#B)
2 x Locking Washer (#C)
Installation:
• Loosen the two pre-installed screws from the side of the Main Barrel.
Hook up the Side Shelf on the screws first then secure the two pre-
loosened screws into place.
• From underneath, secure the Side Shelf to the side panel of the Main
Barrel using two screws, washers, and locking washers.
14. SECURING THE FRONT SHELF BRACKETS
Parts Required:
1 x Front Shelf Bracket Right (#24)
1 x Front Shelf Bracket Left (#25)
4 x Screw (#A)
4 x Washer (#B)
4 x Locking Washer (#C)
Installation:
• Secure each Front Shelf Support Bracket onto the Front Support Leg by
using two screws, washers and locking washers.
12
A
C
B
6
5
5
C
B
14
25
24
ACB
ACB
13
27
BCA