Warning
Common Safety Instructions for Controllers
Before selecting or using PISCO products, read the following instructions. Read the
detailed instructions for individual series as well as the instructions below.
1. Some products have an air direction to control. Make sure to distinguish the
direction by marking on the products. Installing the product with the wrong
direction may cause personal injury or property damage.
2. Avoid any load on PISCO products such as a tensile strength, twisting,
bending, dropping and excessive impacts. These may cause damage to the
products.
3. Locknut needs to be tightened by hand. Do not use any tool. Using tools to
tighten the locknut may cause damage to the products. Also, inadequate
tightening may loosen the locknut and the initial setting can be changed.
4. Use clean air to supply. Dusts and sludge may result in the change of the
initial setting.
Disclaimer
1. PISCO does not take any responsibility for any incidental or indirect
loss, such as production line stop, interruption of business, loss
of benefits, personal injury, etc., caused by any failure on use or
application of PISCO products.
2. PISCO does not take any responsibility for any loss caused by natural
disasters, fires not related to PISCO products, acts by third parties, and
intentional or accidental damages of PISCO products due to incorrect
usage.
3. PISCO does not take any responsibility for any loss caused by improper
usage of PISCO products such as exceeding the specification limit or not
following the usage the published instructions and catalog allow.
4. PISCO does not take any responsibility for any loss caused by remodeling
of PISCO products, or by combinational use with non-PISCO products and
other software systems.
5. The damages caused by the defect of Pisco products shall be covered but
limited to the full amount of the PISCO products paid by the customer.