No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
^ĞĐƟŽŶ
4
B. INSTALLATION OF THE STABILIZERS AND TOP PLATES
1. Install stabilizers and top plates
a. Install the stabilizer on the wall while ensuring to
leave a gap between each end. You must insert the
stabilizer inside the vertical tabs that are at the
top of the upright. Theses tabs will allow a better
solidity of the assembly and will also facilitate
installation.
(Image 4 & 5)
b. Place the top plates on the top of the upright. Align
the holes on the top plate with those on the top of
the upright. The stabilizer must be inserted inside
the back of the top plate. To facilitate the top plate
installation, we suggest that you begin the insertion
of it by the interior side of the pool and then clip it
forward.
(Image 6)
c. Ensure that the upright is level.
d. Attach upright to the top plate using screws.
(Image 6)
Repeat until you have installed all the stabilizers
and top plates.
(Image 7)
Important Note:
Ensure to leave a gap between the two stabilizers.
See Diagram:
Please refer to your pool’s footprint (Section 1, pg 11) for
gap measurement.
6
4
5
7
4-2