Replacing the rubber pads
Starting o
ff
at one of the ends, first remove the worn out
rubber pad. Peel the backing o
ff
one of the replacement
rubber pads included within the accessories. Start by
aligning the round hole exactly around the Torx flange
screw, then align the other end of the pad around the
large eye. While slightly flexing the rest, press down the
middle part of the pad. Before using the rest, press the
whole rubber pad strongly onto the wood, especially
around its entire edge.
18
EN
S
3
Shoulder leg with flat joint
C
4
Chest leg with barrel joint
MEDIUM SIZED VIOLAS
23
.
5
-
24
.
5
cm)
Do not need any of the ErgoPack parts for size adjustment.
In this case the ErgoPack may be used to create the same
configurations as for the violin model as described in the
ErgoPack section for violin (see page
15
-
16
).
LARGE VIOLAS
24
.
5
cm and wider)
24
.
5
-
25
.
5
cm: Use S
3
or C
4
. Using C
4
the rest will point
further over the shoulder, using S
3
the rest will lie more
towards the chest.
25
.
5
cm or wider: Use S
3
and C
4
simultaneously.
INSTRUCTION MANUAL
TUTORIAL VIDEOS
www.KorfkerRest.com
For help with adjusting and maintaining the KorfkerRest®
you can find our tutorial videos under www.KorfkerRest.com
covering the following topics:
• STARTING POSITION
• WIDENING THE REST
• NARROWING THE REST
• CHANGING THE TILT OF THE REST
• BENDING THE REST
• CHANGING THE TWIST
• REPLACING THE PADS
EN
19
