MAINTENANCE
Emptying the dust container
When the dust container is almost full, the indicator LED will light up. Once
the dust container is cleaned the LED will switch off. If the LED remains lit
after cleaning, then the filters will require cleaning or replacing. The vacuum
should not be used until the LED light is OFF.
Push the release lock and lift the
cover to expose the dust container.
Remove the HEPA filter and dust
container.
Hold the dust container in position
over a rubbish bin and press the
button to open the base and
release the dust.
The dust container can be wiped
clean or washed in warm soapy
water and dried thoroughly. To
achieve the best results remove the
filters prior to washing.
Cleaning Filters
Please Note: It is very important to keep the filters clean to receive
maximum performance from the vacuum. Not cleaning and not replacing
your filters regularly can reduce the suction power and cause
overheating of the motor.
The pre-motor filter is located under
the dust container cover.
This filter can be washed and
reused. Ensure the filter is
thoroughly dry before reusing.
