Page 11 of 18
12 Safety Devices Operation
NOTE
: The motor has an overheating protection device built in.
It will automatically switch off power to the motor if it overheats. e.g. from
blocked nozzles, full dust Canister or uncleaned blocked filters.
If this happens, turn off the vacuum and unplug from power socket, clean
blockage and / or filters and allow to rest for at least 60 minutes which should
be enough time for the motor to cool down.
Important
: If the over-temperature device activates and turns the motor off,
and you do not unplug the appliance from the power point, the motor will
restart automatically after it has cooled down enough to reset the safety
device.
NOTE
: The vacuum cleaner has a Vacuum Suction Relief Valve built into the
handle of the dust canister.
NEVER BLOCK THIS OPENING
.
13 Emptying the Dust Canister
Empty the Dust Canister as frequently as possible or when the suction power
is reduced.
•
To remove the Dust Canister, turn off the power and unplug.
•
Grip the handle on the Dust Canister,
press the Dust Canister Release Button
and pull the Dust Canister forward and out
of the housing.
•
Take the dust container to a dustbin.
•
Press the Trap Door release button and the trap
door will open emptying the contents into the bin.
