Piranha PII-140, Инструкции и запасные части

Страница: 9 / 44

Lubrication
General
The importance of correct Lubrication cannot be overemphasized. Under no
circumstances should the machine be operated without complying without the lubrication
requirements set forth in this publication.
Lubrication Diagram
Lubrication Chart
Station Part Lubricated Frequency Instructions
Type
Lube
1 Trunion Pin - On Side Every .40 Hours Apply Grease Gun Mobile HB
12 Trunion Pin - Off Side Or Weekly With Until Grease Or Any
2 Gib -- On Side Normal Use Appears Around Multi-
11 Gib - Off Side Edge of Parts Purpose
8 Coper Side Plate-On Side (2 Places) Grease
10 Coper Side Plate-Off Side (2 Places)
7 Angle Guide Pins (2 Places)
4 Hold Down Shaft
5 Angle Knife Bushing
6 Hold Down Link
3 Cylinder Clevis
9 Rear Hinge Pin Multi
Drive Motor Located Inside Every 100-150 One Shot From purpose
Drive Motor The Cabinet Operating Hour Grease Gun Grease
9