Page 13 of 16
14.1.1 Pre Motor Foam Filter
Remove the Dust Canister as described prior.
The Pre Motor Filter is located in the top section of
the Vacuum cleaner where the Dust Canister was
removed from.
Remove this Filter by rotating it and pulling out of its
recess.
Remove the foam from the holder and wash
the foam filter in warm mild soapy water,
rinse in clean fresh cold water and let dry.
Only clean the white filter if it is very dirty.
wash the filter in warm mild soapy water,
rinse in clean fresh cold water and let dry.
DO NOT
scrub the filter or place in a dishwasher.
DO NOT
use a hair drier to dry the filter.
NOTE
: Never use the vacuum cleaner with wet or damp filters. Using
wet or damp filters will damage the filters, may cause serious damage to
the vacuum cleaner and will void your warranty.
Place the Foam Filter back in its recess (or replace with a new one) then
reinsert into the Vacuum Cleaner.
14.1.2 Main Filter
Remove the Dust Canister from the vacuum cleaner.
Remove the filter assembly from the top of the dust
canister by rotating clockwise and pulling upward.
Wash the Foam Filter in warm mild soapy water, rinse
in clean fresh cold water and let dry.
Only clean the white filter if it is very dirty.
wash the filter in warm mild soapy water,
rinse in clean fresh cold water and let dry.
