Page 16 of 20
12.1.2 Pre Motor Filter
The pre-motor foam filter is located behind the dust canister in the
housing.
Remove the dust canister as explained previously.
To Remove this filter, grasp with your fingers and pull straight out.
Wash the foam filter in warm mild soapy water, rinse in clean fresh cold
water and let completely dry.
DO NOT
scrub the filters or place in a dishwasher.
DO NOT
use a hair drier to dry the filters.
NOTE
: Never use the vacuum cleaner with wet or damp filters. Using
wet or damp filters will damage the filters, may cause serious damage to
the vacuum cleaner and will void your warranty.
Refit the Filter (or replace with a new one) by pushing into the recess.
It is recommended to clean this filter every 3 months or sooner if
required.
12.1.3 Exhaust Air Filter
The exhaust air filter cleans the air a final time before it leaves the
vacuum cleaner.
You can access and clean the exhaust air filter as follows: It is located
behind the dust canister in the housing.
Remove the dust canister as explained previously.
