Page
6
of
12
6 Assembly
A small amount of assembly is required when you receive your steam mop.
You will need a Philips Head Screwdriver.
•
First, remove all the components from the packaging.
•
Take the Handle and fit it into the hole located in the top of the Steam
Mop body. Refer Image on Front Page for orientation of handle grip.
•
Fit the Long Screw into the hole on the back of the Steam Mop body and
screw in tight.
•
Take the Floor Head and insert it into the opposite end of the Steam Mop
body. Press in firmly all the way.
