Page
10
of
12
9 Water Filter
This appliance is fitted with a water filter to filter out and large particles which
could block the steam jet.
This filter needs to be replaced once a year or more often depending on your
water quality.
•
To remove the filter, first remove the water tank as described under
“Operation”.
•
Grasp the black water filter and slide up towards the handle (same
as if removing the water tank)
•
Refit a new filter by locating it in the Steam Cleaner body and slide
down all the way until fully inserted.
•
Refit the water tank.
10 User Maintenance
WARNING
: The appliance must be switched off and the plug must be
removed from the power point before any maintenance, cleaning or
replacing the Micro Fibre Pads.
NOTE
: To maximise the performance of your steam mop, you should clean
the microfiber pads regularly.
10.1 Cleaning the Micro Fibre Pads
The Micro Fibre Pads must be cleaned regularly for best cleaning
performance.
Simply wash the Micro Fibre Pads in warm mild soapy water, rinse in
clean fresh cold water and let dry.
The Micro Fibre Pads may be washed in a washing machine on a
Normal Wash.
DO NOT
scrub the Micro Fibre Pads or Tumble Dry.
