-4-
If you activate the temperature control please
check compatibility of your atomizer setup to
the selected wire type and calibrate the initial
resistance before the first firing!
(>> Advanced Operating)
Features
Standby
If not used for more than 10 seconds, the OLED
screen of your SERIES-B DNA 75W will dim.
When left unused for further 20 seconds, it will
enter standby mode and the screen will switch
itself off. Press any button to leave standby
mode.
Stealth mode
While the device is locked, press and hold
and for five seconds to cycle into stealth
mode. While in stealth mode, the OLED screen
will remain off during use, other than to display
lock and error messages. Repeat to return to
normal mode.
Pass through function
While the device is charging, it can still be
used as a pass through (i.e. it can be used and
charged at the same time). Please ensure a
sufficient residual charge of your battery (>10%)
to avoid collapsing voltage at high current load.
Reverse polarity protection
The SERIES-B DNA 75W includes built in
electronic reverse polarity protection to protect
the user, PCB, device, and battery in case of
a battery will be inserted backwards.
Onboard temperature sensing
To avoid overheating, the SERIES-B DNA 75W
is fitted with an internal temperature sensor.
If the PCB temperature reaches a maximum
value, the device will shut down automatically!
Battery management system
The integrated battery management system
allows the SERIES-B DNA 75W to monitor the
voltage of your battery continuously. If due to
insufficient capacity the voltage falls below a
definable limit - idle or loaded
–
the power
output will be locked automatically to avoid
exhausting the battery. If the requested voltage
under load cannot be delivered by the battery
(voltage drop in case of overload), the device
reduces the power output automatically to
a save level.
(>> Advanced Operating)
Important Information
Handling of Lithium-Ion cells (Li-Ion)
-
Do not short-circuit Li-Ion cells. When
storing or transporting individual cells
always use a suitable transport container.
-
Do not immerse Li-Ion cells in liquids or
throw into fire.
-
Do not expose Li-Ion cells to extreme
temperatures.
-
Do not use damaged Li-Ion cells or cells
whose insulation is damaged
-
Only use chargers suitable for Li-Ion cells.
-
Never charge Li-Ion cells unsupervised.
-
Always use cells of the proper type and
sufficient load ratings.
-
Dispose of Li-Ion cells at designated
recycling points only.
Instructions for use and storage
-
Keep eCigarettes and eLiquids out of the
reach of children and pets.
-
Only use compatible refills, connectors or
spare parts.
-
Always operate your eCigarette within the
recommended power range.
-
Never open a device unless explicitly
mentioned and explained in the manual.
Disposal
Used electrical and electronic equipment as
well as batteries must not be disposed of in
domestic waste. Consumers are legally bound
to bring them to suitable collecting points.
You may also return used devices and batteries
directly to us for proper disposal. Used devices
and batteries contain valuable reclaimable raw
materials.
The environment and PIPELINE thank you
for your contribution!
