Dry Hit
A „Dry Hit“ refers to bad or nonexistent liquid flow to the heating coil
which will cause a very unpleasant taste.
Wire types
The thickness of the wire determines how quickly the coil reaches
the set temperature. You can compensate for the deficiency of a
sluggish coil with higher power, but this also increases the power
consumption.
Also you will require different wire for different types of atomizer
for example a Dripper has a different process. Changing your wick
material often will require a firmer wire. The Dicodes wire Resistherm
NiFe30 is much more stable than the well known temperature-
controlled vaping nickel wire Ni200.
The PIPELINE PRO 2 PLUS can use any wire with a high temperature
coefficient by adjusting the
temperature coefficient.
Please do not forget to enter it in the extended functions menu
(Temp Menu> Temp COF).
Temperature control
Depending on the setting will determine a temperature control or a
temperature limit.
If the power is set low with good liquid flow but does not reach the
selected temperature, the PIPELINE PRO 2 PLUS limits the temperature
to avoid a dry hit. If the power is set high and the selected
temperature is reached, the PIPELINE PRO 2 PLUS adjusts power to
maintain a stable temperature.
Care must be taken when inserting the battery into the
PIPELINE PRO 2 PLUS. Hold the device at a slight angle and carefully
insert the battery (positive terminal first).
You have purchased from us a battery / a battery-powered product.
The battery will provide you with long service and when it reaches
the end of its life it must be disposed of responsibly.
Batteries cannot be disposed of in household waste and must be
taken to a recycling point, alternatively you can return the battery to:
PIPELINE-UK LTD,
19 Watergate Street, Chester,
CH1 2LB.
Batteries contain valuable raw materials that can be recycled.
The environment and PIPELINE say thank you.
WEEE Reg no. DE10791500
Electronic cigarettes are not „healthy“, but they are less harmful
than regular cigarettes. Electronic cigarettes are an alternative to
cigarettes and not suitable for smoking cessation.
Electronic cigarettes are not suitable for children under the age of
18, non-smokers, people with allergies to nicotine and propylene
glycol, pregnant or breastfeeding women and people with
cardiovascular diseases. Our products are not for sale to, or use by
anyone under the age of 18 years!
WWW.PIPELINE-STORE.COM
10 NOTES
BATTERY RECYCLING
09 BASICS OF TEMPERATURE CONTROLLED VAPING
It is now also known that high temperatures may cause undesirable
side effects.
With a functioning temperature controlled setup dry hits are
effectively excluded. So you can use an atomizer without a window
to the last drop of liquid.
To use the temperature control, you need an atomizer with a
heating wire, which has a high temperature coefficient
(we recommend the Dicodes wire Resistherm NiFe30).
Due to the high temperature coefficient, the resistance of the wire is
increased as soon as the coil is heated. It is necessary for the
atomizer to be at room temperature to calibrate, so that on the basis
of resistance changes the PIPELINE PRO 2 PLUS can determine the
temperature of the heating coil.
Please ensure that the wraps of the coil do not touch and the
contacts of the 510 port and within the atomizer used are clean.
Corrosion or contamination of a contact area can lead to low
resistance variations, which are then erroneously interpreted by the
electronics as temperature changes. Therefore, all contacts should
be cleaned regularly with alcohol.
With the PIPELINE PRO 2 PLUS you can find the optimum temperature
and thus the optimum flavour.
TERMS
Temperature Coefficient
This value describes how much the resistance of the
heating wire changes with increasing or decreasing temperature.
Calibration
During calibration, the zero point of the measurement is accurately
determined. As with a speedometer in a car, when at rest it must
show 0 mph. If the calibration is not carefully carried out a reliable
measurement of the temperature is impossible.
The PIPELINE PRO 2 PLUS has automatic or manual calibration.
We recommend calibrating the coil manually. It is important that the
atomizer is at room temperature at the time of calibration (eg. 20 ° C).
We recommend heating the coil to the “evaporation phase“ a
second time to calibrate, since the resistance of the wire may vary.
Caution: When auto-calibrating, make sure to wait a few minutes
before changing the battery so that the atomizer cools.
