Pioneer XY Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 43

Pioneer XY Series Скачать руководство пользователя страница 9

THE SECONDARY SAFETY FEATURE

AFTER INSTALLATION

If the wire or the chain is too long, it would not be effective enough to prevent an accidental fall.

-

The secondary safety feature must be used

to prevent the speaker from falling. Eye bolts to be used as

secondary safety feature are not included with the products. When you use any commercially-available
eyebolts, the above-listed safe working load limits and other specifications should be met.
- With any suspension method, a second anchor point should be used as safety feature.

- Ensure a wire or a chain to be used as secondary safety feature is securely

suspended vertically from the

ceiling or wall

.

If such a wire or a chain is suspended from the inclined ceiling or wall, or it is horizontally suspended,
the wire or the chain would not be effective to prevent an accidental fall.

- Do not use the double safety hoisting accessory enclosure connection together with the main hoisting
accessory connection.

- An appropriate length of wire or chain should be used as second safety feature.

It is generally

recommended that the fall prevention wire be 100 mm longer than the main suspension wire/chain/tool.

- After installation, you must confirm that the speakers are safely installed. You must also periodically check
them to make sure that they are still safe.
- After installing the speaker, never loosen any of its screws, since the speaker could fall or other accidents
could occur.
- You must confirm that the speakers are safely installed right afeter earthquake.

http://pioneerproaudio.com/

Page 9 / 43

©2020 AlphaTheta CORPORATION

«
...
7
8
9
10
11
...
»

Содержание XY Series












































Отзывы:

Нет отзывов