3 Rigging And Caster Setting
_________________________________________________________________________________________________________
(4b)
(5b)
(6b)
Lift the speaker up to the ceiling and insert the temporary fixing bolts on the side of the speaker into the
temporary fixing slits in the yoke. (Fig.3-2-2-G)
Once the speaker is attached to the yoke, securely fasten the yoke fixing bolt and angle adjustment socket head
bolt. (Fig.3-2-2-H)
After that, remove the temporary fixing bolts. (Fig.3-2-2-I)
Attach the two socket head bolt (G) to the temporary fixing
points on the side plate. Insert the bolts into the side plate by
about 10 mm.
There is no need to install the Flat washer and Spring washer
with the bolts. (Fig.3-2-2-F)
Fig.3-2-2-H
(G)
Fig.3-2-2-I
Fig.3-2-2-F
Fig.3-2-2-G
NOTE: XY-1 is shown in the illustration.
(F)
(G)
(H) (I)
(G)
http://pioneerproaudio.com/
Page 16 / 43
©2020 AlphaTheta CORPORATION