Using the timer
08
38
En
Setting the wake-up timer
Use the wake-up timer to set the unit to switch
on at any time and start playing iPod or AUX.
If iPod is selected as the timer sound, when the
wake-up timer operates, the iPod’s power will
automatically turn ON and playback will begin.
1
With input set to iPod or AUX
1
, press
.
The current time and day are displayed.
2
Press
again.
The Timer Setup screen is displayed.
3
Use
/
to select ’Wake-up’, then press
ENTER.
The Wake-up screen is displayed.
4
Use
/
to select ’Timer Edit’, then press
ENTER.
The Timer Edit screen is displayed.
5
Set the desired time for the wake-up
timer.
Use
/
to set the hour, then press
. Set
the minute in the same way, pressing
when
you’re done.
6
Use
/
to select the day. Use
/
to
set the wake-up timer to ON/OFF as desired,
then press ENTER.
The wake-up timer is set to OFF on days
marked with ‘*’.
7
Press ENTER.
The Timer Check screen is displayed.
When the wake-up timer is set to ON, the
TIMER
indicator lights green.
Turning the wake-up timer on/off
1
With input set to iPod or AUX, press
.
The current time and day are displayed.
2
Press
again.
The Timer Setup screen is displayed.
3
Use
/
to select ’Wake-up’, then press
ENTER.
The Wake-up screen is displayed.
4
Use
/
to select ’Timer On’, then press
ENTER.
When the timer is set to ON, ’Timer Off’ is
displayed.
Using the sleep timer
The sleep timer switches off the unit after a
specified time so you can fall asleep without
worrying about it.
•
Press SLEEP repeatedly to select a switch
off time.
Choose between 5 min, 15 min, 30 min, 60 min,
90 min or Off.
During operation of the sleep timer, the
TIMER
indicator will light orange.
• If you press
SLEEP
while the sleep timer is
set, the remaining time will be displayed.
2
Note
1 In order to use the wake-up timer when the AUX function is selected, you must first begin playback on the connected device.
2 The sleep timer can be reset by pressing
SLEEP
while the remaining time is displayed.
XW-NAC3_CUZXTSM.book 38 ページ ２０１０年４月６日 火曜日 午後１時１８分
