XV-HTD330
104
1
2
4
1
2
4
C
D
F
A
B
E
To enter ID DATA Input Mode, with the ID number set, press the
ESC key then the STEREO key.
ID DATA Input Mode
1
When writing of the data read from the disc to flash ROM is
completed, "Rom Write OK!" is displayed. After seeing this
message, you can exit this mode by pressing the CLEAR key.
5
If the data cannot be read from the disc, "Disc Error!" is
displayed on the screen, and the disc is ejected.
6
When the STEREO key is pressed, the unit enters ID DATA
Input Mode.
2
If the DVD DATA DISC (GGV1085) is loaded in this mode, the
unit automatically starts reading the data.
(If the ID DISC has already been loaded, the unit does not start
reading the data. In this case, open then close the tray.)
3
To exit this mode, press the CLEAR key. While data are being
read from the DVD DATA DISC (GGV1085), you cannot exit this
mode.
4
[Player's ID Number Setting]
ID Number ?
[ 0 0 0 0 0 0 0 0 1 ]
Compare
>
∗
∗
∗
∗
∗
∗
∗
∗
∗
<CLEAR> Exit
<STEREO> ID Data Setting Mode
Input ID Number !
2
[Player's Data Input Mode]
<CLEAR> Exit
Insert The ID Data Disc !
4
[Player's Data Input Mode]
Rom Write OK!
<CLEAR> Exit
5
[Player's Data Input Mode]
Disc Error!
<CLEAR> Exit
6
Note: Whether or not the data have been written to flash ROM can
be confirmed by watching for the message "Rom Write OK!"
being displayed after the disc is read.
• Indication when the data have not been set
If no ID data are set after the ID number is changed, the message
"NO ID DATA" flashes on the screen and FL display for a few
seconds after the power is turned on or during Stop mode.
Symptom
Possible Cause
Location
of Trouble
The tray does not open. (Nothing works)
Press the POWER OFF key.
→
The "OFF" indication does not disappear.
Press the
0
(OPEN) key.
→
The "OPEN" indication does not disappear.
Press the
3
(PLAY) key.
→
The indication changes from "NO DISC" to
"OPEN," and the unit does not operate.
(When a disc is not loaded in the tray.)
• Damage of the loading motor
• Disconnection, breaking, or damage of the
jumper wire
The tray does not open. (A continuous clatter is heard.)
Tray No. indications 1 to 5 are flashing.
• Disconnection, breaking, or damage of the
flexible cable (7P)
• Breaking or damage of the tray
open/close position switch (S21)
The tray opens by itself when the power is turned on and stays open.
• Disconnection, breaking, or damage of the
flexible cable (8P)
The rotary tray does not stop at its home position.
(It may stop suddenly during rotation.)
• Breaking or damage of the tray position
detect sensor (PC22)
The indication "CHANGE" does not change when the power is turned on.
The rotary tray does not rotate. (Opening and closing of the tray are possible.)
• Damage of the motor for the rotary tray
drive
• Disconnection, breaking, or damage of the
jumper wire
A clatter is heard when the disc is clamped.
• The gears of the planet base are not
engaged correctly.
The rotation of the rotary tray does not stop after the power is turned on.
Two or more disc loading indications light for tray Nos. 1 to 5.
The slit part on the bottom of the rotary tray
is damaged.
The rotary tray rattles while rotating.
When the rotary tray rotates, a rattling sound is heard.
• Damage of the worm gear
• Insufficient lubricant
• Breaking or damage of the disc detect
sensor (PC21)
1
2
3
4
5
6
7
8
9
10
Examples:
Normal condition:
Abnormal condition:
Two indications light.
Table Mechanism Section
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
