47
XC-LA21
9
7
8
9
Carriage 200 is lightly
lifted by the finger.
,
8
7
7
When Carriage 100 drops below, Carriage 200 is lightly lifted
by the finger.
Note : Lift it horizontally when you lift Carriage.
Carriage inclines when it is not the horizontal, and
mechanism locks.
Bevel Gear is turned clockwise (direction of a rear side from
a front side) like the state of .
9
Carriage 200 lifts up. And, when the movement is started
Carriage 100 to the direction of a front side, separates the hand
which lifted Carriage 200.
Carriage 100
Surface of Drawer
10
11
Keeps turning Bevel Gear clockwise (direction of a rear side
from a front side) until Carriage 100 bumps to the wall on
a front side.
11
The position of a right and left, black cam is matched while
confirming it from the table side of Drawer.
Cam Mark
Cam Mark
Meanwhile, Mark of right and left,
black Cam is matched.
Bevel Gear is turned clockwise.
(direction of a rear side from a front side)
3
3
Hang Carriage only here of Pinion.
FRONT side
•
Notes of procedure .
4
3
5
5
6
Carriage 200
4-1
4-2
4-1
Puts Carriage 100 on Carriage 200 which applies by .
Be careful about notes by at this time.
The other side of the side applied by of Carriage is lightly
pushed.
6-1
Carriage 200 moves to a front side.
6-3
Carriage 100 drops below.
6-2
Bevel Gear is turned as it is clockwise.
(direction of a rear side from a front side)