Getting started
04
9
En
English
Français
Español
Deutsch
Italiano
Nederlands
Svenska
Chapter 4:
Getting started
Setting the clock
1
Press
Í
to turn the power on.
2
Press TIMER on the remote control.
“CLOCK” is shown on the main display.
3
Press ENTER.
4
Press
/
to set the day, then press
ENTER.
5
Press
/
to set the hour, then press
ENTER.
6
Press
/
to set the minute, then press
ENTER to confirm.
7
Press ENTER.
To confirm the time display:
Press the
TIMER
. The time display will appear for about 10
seconds.
To readjust the clock:
Perform “Setting the clock” from step 1.
Note
• When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
Sound controls
Equalizer
When the
EQ
is pressed, the current mode setting will be
displayed. To change to a different mode, press the
EQ
repeatedly until the desired sound mode appears.
P.BASS control
When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the
P.BASS
on the remote
control.
BASS/TREBLE control
Press the
SOUND
to select “
BASS
” or “
TREBLE
”, then
press
/
to adjust the bass or treble.
Note
• The
EQ
and
P.BASS
cannot operate simultaneously.
The most recently selected of these two functions will
be the one used.
•
SOUND
can operate alongside either the
EQ
or
P.BASS
.
When one of the above two functions is selected,
the function that is not selected will be displayed
as follows.
1
When P.BASS setting (ON/OFF) is changed
•
EQ
: FLAT
2
When EQ setting is changed
•
P.BASS
: OFF
NIGHT
FLAT
A flat and basic sound
ACTIVE
DIALOGUE
A sound that can be enjoyed
at night even with lower volume
A powerful sound that
emphasizes low and high tones
A sound that allows the radio or
vocals to be heard more easily