Bluetooth
®
Audio playback
22
En
09
Chapter 9:
Bluetooth
®
Audio playback
Note
• The
Bluetooth
wireless technology enabled device
must support A2DP profiles.
• Connection is not always guaranteed with all
Bluetooth
-
enabled devices.
Pairing with the unit
1
Press the
Í
and turn the power to the unit
on.
2
When you press the button on the remote
controller, [PAIRING] is displayed on this unit's
display, and the pairing mode is enabled.
3
Enable (turn on) the
Bluetooth
function of
the
Bluetooth
capable device, then select this
unit from amongst the devices displayed. If a
password is requested, enter "0000".
• This unit will be displayed as “Pioneer X-SMC02” on all
Bluetooth
capable devices that you have.
• Please refer to the user’s manual for your
Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
4
The name of the
Bluetooth
capable device
will be displayed on the front panel of the unit.
• Only single-byte alphanumeric characters can be
displayed. Any character that cannot be displayed will
be indicated by a
“*”
.
Playing Back
1
Press the
.
The unit will switch to
BT AUDIO
input.
2
A
Bluetooth
connection will be created
between the
Bluetooth
capable device and the
unit.
Procedures for connecting to the unit should be performed
from the
Bluetooth
capable device. Please refer to the user’s
manual for your
Bluetooth
capable device for details of the
connection procedures.
3
Playback music from the
Bluetooth
capable
device. Increase the volume of the
Bluetooth
capable device to an appropriate level.
• Due to the characteristics of
Bluetooth
wireless
technology, the sound produced on this unit may
slightly be behind the sound played on the
Bluetooth
capable device.
Note
• When
Bluetooth
capable devise is not connected and
no operations have been performed for more than 20
minutes, the unit will automatically power off. In this
case it is required that the Auto power off is switched to
ON
.
• Auto power off can be switched to
ON
/
OFF
BT STANDBY
• The following can be done when the unit is on standby
with the BT STANDBY switched
ON
.
• By selecting a
Bluetooth
capable device that already
has a connection history (pairing has already been
conducted) with this unit, this unit will automatically turn
on with the
BT AUDIO
function.
BT STANDBY settings
1
Press the
.
2
Press MENU and then press
/
until “BT
STY” appears on the display.
3
Press ENTER and then press
/
to switch
BT STANDBY ON/OFF.
• It is set to
OFF
in the factory setting.