Making recordings
09
56
En
Chapter 9:
Making recordings
Making an audio or a video
recording
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
Keep in mind you can’t make a digital
recording from an analog source or vice-
versa, so make sure the components you are
recording to/from are hooked up in the same
way (see
Connecting up
on page 16 for more
on connections).
If you want to record a video source, you also
need use the same type of connection for the
source as for the recorder. For example, you
can’t record a component hooked up to S-
video jacks with a recorder hooked up to the
component video outputs (see page 20 for
more on video connections).
1
Select the source you want to record.
Use the
MULTI CONTROL
buttons (or
INPUT
SEL
).
2
Select the input signal (if necessary).
Press
SIGNAL SEL
(
SIGNAL SELECT
) to select
the input signal corresponding to the source
component (see page 37 for more on this).
3
Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4
Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
Refer to the instructions that came with the
recorder if you are unsure how to do this.
Most video recorders set the audio recording
level automatically—check the component’s
instruction manual if you’re unsure.
5
Start recording, then start playback of
the source component.
• The receiver's volume, balance, tone
(bass, treble, loudness), and surround
effects have no effect on the recorded
signal.
DVD
VCR
CD-R
TV
RCV
TVC
TUN
CD
MULTI CONTROL
RECEIVER CONTROL
SIGNAL SEL
INPUT SEL
