Playing sources
06
37
En
Choosing the input signal
• Default setting:
AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
•
Press SIGNAL SEL (SIGNAL SELECT) to
select the input signal corresponding to
the source component.
Each press cycles through the options as
follows:
The
AUTO
setting automatically switches to
DIGITAL
if a digital source is detected, other-
wise the signal select will be
ANALOG
.
DVD 7.1ch
will only appear when
DVD/LD
is
selected.
When set to
DIGITAL
or
AUTO
,
2
DIGITAL
lights when a Dolby Digital signal is input,
and
DTS
lights when a DTS signal is input.
• This receiver can only play back Dolby
Digital, PCM (32kHz–96 kHz) and DTS
digital signal formats (including DTS
96kHz/24 bit). With other digital signal
formats, set to
ANALOG
.
• You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 17) and
set the signal input to
DIGITAL
.
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
Listening to multi-channel
playback
RECEIVER CONTROL
SIGNAL SEL
DIGITAL
DVD 7.1 ch
AUTO
ANALOG
INPUT SEL
DVD
VCR
CD-R
TV
RCV
TVC
TUN
CD
MULTI CONTROL
RECEIVER
RECEIVER CONTROL
STANDARD
