EXPER
T
Fine Tuning Your System
99
En
1
Expert
[Crossover Network
]
[Fine Channel Level ]
[Fine Channel Delay ]
[
Acoustic Cal EQ
]
[Bass Peak Level ]
[D-Range Control ]
[Exit ]
ACOUSTIC CAL EQ
This setting is a kind of room equalizer for your speakers and is set automatically if you did the AUTO
SURROUND SOUND SETUP (see pages 13–15), which we strongly recommend. It balances the frequency
response between your speakers. In order to follow the instructions in this section you should have done AUTO
SURROUND SOUND SETUP on pages 13–15.
This receiver lets you choose between two types of ACOUSTIC CAL EQ equalizer curves: ALL CH ADJUST and
FRONT ALIGN, with the former equalizing the speakers individually and the latter equalizing the speakers in
accordance with the front speakers. Features here allow you to put in your own equalizer preferences. To do
this use the DATA COPY feature to copy the settings in ALL CH ADJUST and FRONT ALIGN modes and paste
them into CUSTOM 1 or CUSTOM 2. You then choose between the ALL CH ADJUST and FRONT ALIGN types
of curves and increase the amount of a certain frequency in each speaker in accordance with your preferences.
When you playback a source you can choose CUSTOM 1 or CUSTOM 2 to apply your preferences to playback.
When setting up using the ALL CH ADJUST mode you can adjust each speaker individually. With the FRONT
ALIGN mode the front speakers will serve as the reference so you cannot adjust them.
The DATA CHECK feature allows you to see how the settings in ALL CH ADJUST and FRONT ALIGN currently
stand.
When you use ACOUSTIC CAL EQ function (see page 50) you can toggle between the two basic settings, ALL
CH ADJUST and FRONT ALIGN, and the variations you set yourself, CUSTOM 1 and CUSTOM 2.
5
VIDEO SEL
HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
10
DISC
ENTER
7
8
9
0
SYSTEM SETUP
TUNER EDIT
TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
¶
TUNING
–
1
TEXT ON RF ATT
DISP MODE
TUNING
+
¡
8
3
SUB TITLE
BAND
1-5
1-5
STANDBY/ON
MOVIE
MUSIC
MULTI JOG
ENTER
STANDBY
PHONES
SPEAKERS
SIGNAL
SELECT
SB CH
MODE
HI-BIT
HI-SAMPLING
SET UP
RETURN
TONE
TONE CONTROL
BASS/TREBLE
BAND
MULTI JOG CONTROL
To start the process use DATA COPY to paste the ALL
CH ADJUST or FRONT ALIGN settings into CUSTOM 1
or CUSTOM 2.
Follow steps 1-5 on page 95, if necessary, to get to the
starting point mentioned here.
1
ACOUSTIC CAL EQ should be
selected, if it isn’t use the
5∞
buttons to select and press ENTER.
2
Use the
5∞
buttons to select DATA
COPY. Press ENTER.
3
Use the
5∞
buttons to select
CUSTOM 1 or CUSTOM 2 as the
destination you want to copy the
data to. Press ENTER.
4
Use the
5∞
buttons to select ALL
CH ADJUST or FRONT ALIGN as the
type of curve you want to copy.
Press ENTER.
When you press ENTER the data is copied to the
destination you chose.
After you have done this process once you can also
copy data in CUSTOM 1 or CUSTOM 2.
5
When done select EXIT (if it's not
already selected) and press ENTER.
You can now adjust the settings in CUSTOM 1 or
CUSTOM 2.
CUSTOM1 ADJUST
CUSTOM2 ADJUST
DATA COPY
DATA CHECK
[
]
[
]
[
]
[
]
[Exit
]
Acoustic Cal EQ
2
3
CUSTOM1
CUSTOM2
[
]
EQ DATA COPY
NOT DATA COPY
[
]
ALL CH ADJUST
[Exit]
4
CUSTOM1
CUSTOM2
[
]
EQ DATA COPY
FRONT ALIGN
[
]
ALL CH ADJUST
[Exit]
