Pioneer VSX-C501-S, Руководство по эксплуатации

Страница: 33 / 52

Using other functions
08
33
En
2 To switch SR+ mode on/off, press RECEIVER and
TV CONTROL INPUT simultaneously.
The front panel display shows the new setting;
SR+ ON
or
SR+ OFF .
Note
• The automatic volume muting feature is enabled
separately; see SR+ mode for Pioneer plasma displays
on page 36. (You can also use the System Setup
menu to switch the SR+ mode of the receiver.)
• If you disconnect the SR+ cable or switch the plasma
display off while SR+ is on, the receiver will
automatically revert to
SR+ OFF .
Caution
• When the receiver is connected to a plasma display
using an SR+ cable, if the plasma display is switched
off, you cannot use the remote to control the receiver.
Resetting the system
Use this feature to reset the system to its factory default
settings.
1 Press RECEIVER to switch the receiver into
standby.
2 Press MCACC SETUP and SYSTEM SETUP at the
same time.
The display prompts you to confirm.
3 Within 5 seconds, press LEVEL –.
The display shows OK? .
4 Within 5 seconds, press LEVEL +.
The display shows OK and the receiver should now be
reset.
Note
• If the receiver is disconnected from the power outlet
for more than a month it will reset to the default
settings.
• The above reset doesn’t affect the presets that you
have programmed into the remote control (see Using
the remote control with other components on
page 38).
Default receiver settings
The table below shows the factory default settings. When
you reset the system, the receiver reverts to these
defaults:
Note
• The default settings for the remote control to control
other components can be found in Using the remote
control with other components on page 38.
AUDIO
SOURCE RECEIVER
SLEEP
RECEIVER
INPUT
DVD
VIDEO
TV/SAT
FRONT FM/AM
DVR/VCR
SURROUND
ADVANCED
SURROUND
SOUND
MODE
SIGNAL
SELECT
DIALOG
AUTO STEREO
LEVEL LEVEL TEST TONE CH SELECT
MUTE
MASTER
VOLUME
DTV MENU
TOP MENU T.EDIT
MENU
GUIDE
SUBTITLE
MCACC
SETUP
TUNE
TUNE
ST ST
SYSTEM
SETUP
BAND DTV ON/OFF RETURN DTV INFO
A
ENTER
SBch MODE DIMMER
Setting type Default setting Page ref.
Input DVD
Master volume
– – – dB
(no sound)
Listening mode AUTO (all inputs) Page 27
Listening mode (w/
headphones)
STEREO
(all inputs) Page 28
Sound mode OFF Page 28
Dialog OFF Page 28
Surround Back
Channel mode ON (when speaker is
connected)
Page 29
Input signal select AUTO Page 32
Speakers (front,
center, surround,
surround back) setting Automatically sensed Page 34
Subwoofer setting
200 Hz
Page 35
LFE Attenuator 0 dB Page 35
Speaker distance
settings Front left/right:
2.0 m
Center:
2.0 m
Surround left/right: 2.0 m
Surround Back: 2.0 m
Subwoofer:
2.0 m.2.0 m
Page 35
Dynamic Range
Control OFF Page 35
Dual Mono
ch1
Page 36
Input Attenuator OFF (all inputs) Page 36
DVD(TV/SAT) COAX
jack assignment
DVD
Page 36
TV/SAT(DVD) OPT1
jack assignment
TV/SAT
Page 36
Channel levels Front: 0 dB
Center:
0 dB
Surround:
0 dB
Surround Back: 0 dB
Subwoofer: 0 dB
Page 37
SR+ mode
OFF
Page 32
vsx-c501(FL).book 33 ページ ２００３年６月１３日 金曜日 午後１２時４６分