Other Settings
11
65
En
4
Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
•
DRC Setup
– Specify the amount of dynamic range
adjustment to Dolby Digital soundtracks (see
Dynamic Range Control Setup
below).
•
Dual Mono Setup
– Isolate one channel when
listening to discs with dual mono encoding (see
Dual
Mono Setup
below).
•
LFE ATT Setup
– Choose the attenuator level for the
LFE channel (
LFE Attenuator Setup
on page 66).
•
SR+ Setup
– Specify how you want to control your
Pioneer plasma display (
SR+ Setup for Pioneer
plasma displays
on page 66).
•
Multi Room Setup
– Specify your volume setting
and IR receiver type for a multi-room setup (see
Multi
Room Setup
on page 67).
•
12V Trigger Setup
– Specify which components are
switched on or off using the 12 volt trigger (see
12 Volt
Trigger Setup
on page 67).
5
Make the adjustments necessary for each
setting, pressing RETURN to confirm after each
screen.
Dynamic Range Control Setup
• Default setting:
OFF
This setting specifies the amount of dynamic range
adjustment to Dolby Digital and DTS movie soundtracks.
You may want to use this when listening to surround
sound at low volumes.
1
Select ‘DRC Setup’ from the Other Setup menu.
2
Choose the setting that you want.
•
OFF
– No dynamic range adjustment (use when
listening at higher volume).
•
MID
– Mid setting.
•
MAX
– Dynamic range is reduced (loud sounds are
reduced in volume while quieter sounds are
increased).
3
When you're finished, press RETURN.
You will return to the Other Setup menu.
Dual Mono Setup
•
Default setting:
CH1
You can specify how dual mono encoded Dolby Digital
soundtracks should be played. Dual mono is not widely
used, but is sometimes necessary when two languages
need to be sent to separate channels.
1
Select ‘Dual Mono Setup’ from the Other Setup
menu.
2
Choose the setting that you want.
•
CH1
– Only channel 1 is played
•
CH2
– Only channel 2 is played
•
CH1 CH2
– Both channels are played through the
front speakers
3
When you're finished, press RETURN.
You will return to the Other Setup menu.
6. Other Setup
[
a . DRC Setup
]
[ b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[ d . SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
6. Other Setup
[
a . DRC Setup
]
[ b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[ d . SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
6a. DRC Setup
DRC [
OFF
]
6. Other Setup
[
a . DRC Setup
]
[
b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[ d . SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
6b. Dual Mono Setup
Dual Mono
[
CH1
]
VSX_9100TX.book.fm 65 ページ ２００４年５月１９日 水曜日 午前９時５４分
