Pioneer VSX-830-K, Руководство по эксплуатации, Страница: 21 / 141

21
Connecting your equipment (In case of VSX-930)
03
[C] 7.2 channel surround system (Surround back/Front wide) connection
!
Speaker System setting: 7.2ch SB/FW
SBR SBL
SR SL
FWR FWL R
SW2
C
SW1
L
A 7.2 ch surround system connects the left and right front speakers ( L / R ), the center speaker ( C ), the left and right
front wide speakers ( FWL / FWR ), the left and right surround speakers ( SL / SR ), the left and right surround back
speakers ( SBL / SBR ), and the subwoofers ( SW 1 / SW 2 ).
It is not possible to produce sound simultaneously from the surround back speakers and the front wide speakers.
The speakers from which sound is output can be switched using the
OUT P. button. For details, see Switching
the speaker terminals on page 87 .
Playback of Dolby Atmos requires a connection with a surround back speaker or front wide speaker.
[D] 7.2 channel surround system & Speaker B connection
!
Speaker System setting: Speaker B
SBR SBL
SR
R L
SL
R
SW2
C
SW1
L
Speaker B
With these connections you can simultaneously enjoy 5.2-channel surround sound in the main zone with stereo
playback of the same sound on the B speakers. The same connections also allow for 7.2-channel surround sound
in the main zone when not using the B speakers.
The speakers from which sound is output can be switched using the
OUT P.
button. For details, see Switching
the speaker terminals on page 87 .
Playback of Dolby Atmos requires a connection with surround back speakers. However, when SP:
d
A+B ON or
Speaker B is selected, Dolby Atmos playback is not possible.
[E] 5.2 channel surround system & Front Bi-amping connection (High quality
surround)
!
Speaker System setting: Front Bi-Amp
SR SL
SW2
C
Front Bi-Amp
SW1
L R
Bi-amping connection of the front speakers for high sound quality with 5.2-channel surround sound.
You cannot playback Dolby Atmos with this system.
[F] 5.2 channel surround system & HDZONE connection (Multi Zone)
!
Speaker System
setting:
HDZONE
Main zone
Sub zone
HDZONE
SR SL
SW2
C
SW1
L R
R L
With these connections you can simultaneously enjoy 5.2-channel surround sound in the main zone with stereo
playback on another component in HDZONE. (The selection of input devices is limited.)
You cannot playback Dolby Atmos with this system.
Other speaker connections
! Your favorite speaker connections can be selected even if you have fewer than 5.2 speakers (except front left/
right speakers).
! When not connecting a subwoofer, connect speakers with low frequency reproduction capabilities to the front
channel. (The subwoofer’s low frequency component is played from the front speakers, so the speakers could
be damaged.)
! After connecting, be sure to conduct the
Full Auto MCACC
(speaker environment setting) procedure. See
Automatically conducting optimum sound tuning (Full Auto MCACC) on page 57 .