Other connections
10
72
En
1
Switch the receiver into standby and
connect
Bluetooth
ADAPTER to the
ADAPTER PORT located in the rear panel.
2
Switch on the receiver.
3
Press ADAPTER on the remote control to
switch the receiver to ADAPTER input mode.
1
Pairing
Bluetooth
ADAPTER and
Bluetooth
wireless technology
device
“Pairing” must be done before you start
playback of
Bluetooth
wireless technology
content using
Bluetooth
ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth
wireless technology device to enable
Bluetooth
communications.
2
For more details,
see also the operating instructions of your
Bluetooth
wireless technology device.
1
Press TOP MENU.
2
Press ENTER to enter PAIRING.
3
Select the PIN code to be used from 0000/
1234/8888 using
/
, then press ENTER.
PAIRING
blinks.
Important
• You can use any of 0000/1234/8888 PIN
codes.
Bluetooth
wireless technology
device using any other PIN code cannot be
used with this system.
4
Switch on the
Bluetooth
wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
5
Check to see that the
Bluetooth
ADAPTER
is detected by the
Bluetooth
wireless
technology device.
When Bluetooth wireless technology device is
connected:
Bluetooth
wireless technology device name
appears in the receiver display.
3
When Bluetooth wireless technology device is
not connected:
NODEVICE
appears in the receiver display. In
this case, perform the connection operation
from the side of the
Bluetooth
wireless
technology device.
6
From the
Bluetooth
wireless technology
device list, select
Bluetooth
ADAPTER and
enter the PIN code selected in the step 4.
4
Listening to Music Contents of
Bluetooth
wireless technology
device with Your System
1
Press ADAPTER on the remote control to
switch the receiver to ADAPTER input mode.
2
Perform the connection operation from
the side of the
Bluetooth
wireless technology
device to the
Bluetooth
ADAPTER.
Note
1 When the
Bluetooth
ADAPTER is not plugged into the
ADAPTER PORT
,
NO ADAPTER
will be displayed if
ADAPTER
input
mode is selected.
2 • Pairing is required when you first use
Bluetooth
wireless technology device and
Bluetooth
ADAPTER.
• To enable
Bluetooth
communication, pairing should be done with both of your system and
Bluetooth
wireless technology
device.
3 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
4 PIN code may in some case be referred to as PASSKEY.
VSX-820_SYXCN_En.book 72 ページ 2010年4月12日 月曜日 午後6時52分
Содержание VSX-820-K
Страница 161: ...81 Fr English Français Deutsch Nederlands Italiano Español VSX 820_SYXCN_Fr book 81 ページ 2010年4月12日 月曜日 午後6時59分 ...
Страница 241: ...81 Ru English Français Deutsch Nederlands Italiano Español VSX 820_SYXCN_Ru book 81 ページ 2010年4月12日 月曜日 午後7時2分 ...
Страница 242: ...82 Ru VSX 820_SYXCN_Ru book 82 ページ 2010年4月12日 月曜日 午後7時2分 ...
Страница 243: ...83 Ru English Français Deutsch Nederlands Italiano Español VSX 820_SYXCN_Ru book 83 ページ 2010年4月12日 月曜日 午後7時2分 ...