Listening to your system
05
34
En
Setting the AV options
There are a number of additional sound
settings you can make using the AV Parameter
menu. The defaults, if not stated, are listed in
bold.
Important
• The AV Parameter menu is not available
with
DVD 5.1ch
selected by
SIGNAL SEL
(
SIGNAL SELECT
) (see
Choosing the input
signal
on page 36).
• Note that if a setting doesn’t appear in the
AV Parameter menu, it is unavailable due
to the current source, settings and status
of the receiver.
1
Press
RECEIVER
on the remote control,
then press
AV PARAMETER
button.
2
Use
/
to select the setting you want to
adjust.
Depending on the current status/mode of the
receiver, certain options may not be able to be
selected. Check the table below for notes on
this.
3
Use
/
to set it as necessary.
See the table below for the options available for
each setting.
4
Press
RETURN
to confirm and exit the
menu.
C
CO
O
AV
PARAMETER
TOP MENU
T.EDIT
MENU
RETURN
SETUP
GUIDE
PTY SEARCH
ENTER
TUNE
TUNE
ST
ST
ONE TOUCH
COPY
CH
+
CH
-
RECEIVER
INPUT SELECT
SOURCE
TV/SAT
DVR/VCR
AM
FM
CD-R/TAPE
CD
DVD 5.1
TV CTRL
DVD/LD
RECEIVER
MULTI CONTROL
AUTO/DIRECT
ADV SURR
STEREO/
F.S.SURR STANDARD
Setting
What it does
Option(s)
MIDNIGHT
a
Allows you to hear effective surround sound of movies at
low volumes.
M/L OFF
MIDNIGHT
LOUDNESS
a
Used to get good bass and treble from music sources at
low volumes.
LOUDNESS
BASS
b
Depending on what you are listening to, you may want to
adjust the bass or treble.
–6 to +6 (dB)
Default:
0
(dB)
TREBLE
b
–6 to +6 (dB)
Default:
0
(dB)
CENTER WIDTH
c
(Applicable only when
using a center speaker)
Spreads the center channel between the front right and left
speakers, making it sound wider (higher settings) or
narrower (lower settings).
0 to 7
Default:
3
DIMENSION
c
Adjusts the surround sound balance from front to back,
making the sound more distant (minus settings), or more
forward (positive settings).
–3 to +3
Default:
0
PANORAMA
c
Extends the front stereo image to include surround
speakers for a ‘wraparound’ effect.
OFF
ON
EFFECT
Sets the effect level for the currently selected Advanced
Surround mode (each mode can be set separately).
10 to 90
VSX_918_818_MY.book 34 ページ ２００７年１２月２７日 木曜日 午後４時２７分
