background image

 

Connecting up

04

 

20

 

En

 

Make sure that the speaker cable you’re using 
is properly prepared with about 10 mm of 
insulator stripped from each wire, with the 
exposed wire strands twisted together (

 

fig. A

 

).

Unscrew the terminal a few turns until there is 
enough space to insert the exposed wire 
(

 

fig. B

 

). Once the wire is in position, tighten the 

terminal until the wire is firmly clamped (

 

fig. C

 

).

 

 Caution

 

• These speaker terminals carry 

 

HAZARDOUS LIVE voltage

 

. To prevent 

the risk of electric shock when connecting 
or disconnecting the speaker cables, 
disconnect the power cord before touching 
any uninsulated parts.

 

Hints on speaker placement

 

Speakers are usually designed with a 
particular placement in mind. Some are 
designed to be floorstanding, while others 
should be placed on stands to sound their best. 
Some should be placed near a wall; others 
should be placed away from walls. We have 
provided a few tips on getting the best sound 
from your speakers (following), but you should 
also follow the guidelines on placement that 
the speaker manufacturer provided with your 
particular speakers to get the most out of 
them.

• Place the front left and right speakers at 

equal distances from the TV.

• When placing speakers near the TV, we 

recommend using magnetically shielded 
speakers to prevent possible interference, 
such as discoloration of the picture when 

the TV is switched on. If you do not have 
magnetically shielded speakers and notice 
discoloration of the TV picture, move the 
speakers farther away from the TV.

• If you're using a center speaker, place the 

front speakers at a wider angle. If not, place 
them at a narrower angle.

• Place the center speaker above or below 

the TV so that the sound of the center 
channel is localized at the TV screen. Also, 
make sure the center speaker does not 
cross the line formed by the leading edge 
of the front left and right speakers. 

• It is best to angle the speakers towards the 

listening position. The angle depends on 
the size of the room. Use less of an angle 
for bigger rooms.

• Surround and surround back speakers 

should be positioned 60 cm to 90 cm 
higher than your ears and titled slightly 
downward. Make sure the speakers don't 
face each other. 

• To achieve the best possible surround 

sound, install your speakers as shown 
below. Be sure all speakers are installed 
securely to prevent accidents and improve 
sound quality.

 

 Caution

 

• If you choose to install the center speaker 

on top of the TV, be sure to secure it with 
putty, or by other suitable means, to reduce 
the risk of damage or injury resulting from 
the speaker falling from the TV in the event 
of external shocks such as earthquakes.

• Make sure no exposed speaker wire is 

touching the rear panel, this may cause the 
receiver to turn off automatically.

10 mm

fig. A

fig. B

fig. C

VSX_816.book.fm 20 ページ 2006年2月20日 月曜日 午後2時14分

Содержание VSX-816-K



































































Отзывы: