Pioneer VSX-531D, Руководство по эксплуатации

Страница: 30 / 41

6
6
30
2
35
4
Home Menu
Using the Home Menu
The following section shows you how to make detailed
settings to specify how you’re using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
• The OSD will not appear if you have connected using the
composite output to your TV. Use HDMI connections for
Home Menu.
• If headphones are connected to the receiver, disconnect
them.
• You can’t use the Home Menu when the USB input is
selected.
1
Switch on the receiver and your TV.
Press
Í
RECEIVER
to switch on.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable.
3
Press
HOME MENU
.
The Home Menu appears on your TV. Use  /  /  / 
and
ENTER
on the remote control to navigate through
the screens and select menu items. Press
RETURN
to
exit the current menu.
• Press
HOME MENU
at any time to exit the Home
Menu.
4
Select the setting you want to adjust.
• Full Auto MCACC – This is a quick and effective
automatic surround setup (see Automatically setting up for
surround sound (MCACC) on page 16 ).
• Manual SP Setup
-
Speaker Setting – Specify the size and number of
speakers you’ve connected (see below).
-
X.Over – Specify which frequencies will be sent to the
subwoofer ( page 31 ).
-
Channel Level – Adjust the overall balance of your
speaker system ( page 31 ).
-
Speaker Distance – Specify the distance of your
speakers from the listening position ( page 32 ).
• Input Assign – Specify what you’ve connected to the
(CD) audio input (see The Input Assign menu on page 32 ).
• Auto Power Down – Sets to automatically turn off the
power when the receiver has not operated for several
hours (see
The Auto Power Down menu on page 32 ).
• HDMI Setup – Set the audio return channel function and
set the HDMI input signal to Standby Through output or
not during standby (see
The HDMI Setup menu on
page 33 ).
• DAB Setup – Scan stations and set DAB DRC
(
page 34
).
Manual speaker setup
This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of
your current speaker system or add new speakers).
These settings are designed to fine-tune your system, but if
you’re satisfied with the settings made in
Automatically
setting up for surround sound (MCACC) on page 16 , it isn’t
necessary to make all of these settings.
Speaker Setting
Use this setting to specify your speaker configuration (size,
number of speakers).
It is a good idea to make sure that the settings made in
Automatically setting up for surround sound (MCACC) on
page 16 are correct.
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Setting’ from the Manual SP Setup
menu.
3
Choose the set of speakers that you want to set then
select a speaker size.
Use  /  to select the size (and number) of each of the
following speakers:
• Front – Select LARGE if your front speakers reproduce
bass frequencies effectively, or if you didn’t connect a
subwoofer. Select
SMALL to send the bass frequencies to
the subwoofer.
• Center – Select LARGE if your center speaker
reproduces bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or
subwoofer. If you didn’t connect a center speaker, choose
NO (the center channel is sent to the other speakers).
RECEIVER RECEIVER RECEIVER RECEIVER AUDIO SEL AUDIO SEL AUDIO SEL AUDIO SEL
SAT SAT STREAM BOX STREAM BOX DVD DVD
AV AV
ADJUST ADJUST MUTE MUTE
HOME HOME
MENU MENU
HOME
MENU
HOME
MENU
RETURN RETURN RETURN RETURN
VOLUME VOLUME VOLUME VOLUME
H o m e M e nu
1 . F u l l Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
R e t u r n
6.DAB Setup
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2a.Speaker Setting
Front
Center
Surr
Subwoofer:
Return
[ NO ]
[ NO ]
YES
SMALL