Home Menu
06
32
En
06
Home Menu
Using the Home Menu
The following section shows you how to make detailed
settings to specify how you’re using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
• The OSD will not appear if you have connected using the
HDMI output to your TV. Use composite connections for
Home Menu.
• If headphones are connected to the receiver, disconnect
them.
• You can’t use the Home Menu when the
iPod/USB
input
is selected.
1
Switch on the receiver and your TV.
Press
1
RECEIVER
to switch on.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding
composite cable.
3
Press
, then press
HOME MENU
.
The Home Menu appears on your TV. Use
FGHI
and
ENTER
on the remote control to navigate through
the screens and select menu items. Press
RETURN
to
exit the current menu.
• Press
HOME MENU
at any time to exit the Home
Menu.
4
Select the setting you want to adjust.
•
Auto MCACC
– This is a quick and effective automatic
surround setup (see
Automatically setting up for surround
sound (MCACC)
on page 19).
•
Manual SP Setup
-
Speaker Setting
– Specify the size and number of
speakers you’ve connected (see below).
-
X.Over
– Specify which frequencies will be sent to the
subwoofer (page 33).
-
Channel Level
– Adjust the overall balance of your
speaker system (page 33).
-
Speaker Distance
– Specify the distance of your
speakers from the listening position (page 34).
•
Input Assign
– Specify what you’ve connected to the
ANALOG IN1
audio input (see
The Input Assign menu
on
page 34).
•
Auto Power Down
– Sets to automatically turn off the
power when the receiver has not operated for several
hours (see
The Auto Power Down menu
on page 34).
•
HDMI Setup
– Set the audio return channel function and
set the HDMI input signal to Standby Through output or
not during standby (see
The HDMI Setup menu
on
page 35).
Manual speaker setup
This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of
your current speaker system or add new speakers).
These settings are designed to fine-tune your system, but if
you’re satisfied with the settings made in
Automatically
setting up for surround sound (MCACC)
on page 19, it isn’t
necessary to make all of these settings.
Speaker Setting
Use this setting to specify your speaker configuration (size,
number of speakers). It is a good idea to make sure that the
settings made in
Automatically setting up for surround sound
(MCACC)
on page 19 are correct.
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Setting’ from the Manual SP Setup
menu.
3
Choose the set of speakers that you want to set then
select a speaker size.
Use
HI
to select the size (and number) of each of the
following speakers:
•
Front
– Select
LARGE
if your front speakers reproduce
bass frequencies effectively, or if you didn’t connect a
subwoofer. Select
SMALL
to send the bass frequencies to
the subwoofer.
•
Center
– Select
LARGE
if your center speaker reproduces
bass frequencies effectively, or select
SMALL
to send
bass frequencies to the other speakers or subwoofer. If
you didn’t connect a center speaker, choose
NO
(the
center channel is sent to the other speakers).
SLEEP
INPUT
RECEIVER
RECEIVER
SOURCE
ENTER
RETURN
AUDIO
PARAMETER
MENU
HOME
MENU
TOOLS
BAND
iPod CTRL
PTY
TOP
MENU
TUNE
TUNE
PR
ES
ET
PR
ES
ET
RECEIVER
Home Menu
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
Return
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2a.Speaker Setting
Front
Center
Surr
Subwoofer:
Return
[ SMALL ]
[ SMALL ]
YES
SMALL
96;B3:;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸱ᖺ㸱᭶㸯㸰᪥ࠉⅆ᭙᪥ࠉ༗๓㸯㸮㸱㸵ศ
