Basic Setup
04
44
En
The Input Setup menu
You only need to make settings in the
Input
Setup
menu if you didn’t hook up your digital
equipment according to the default settings
(see
Input function default and possible
settings
on page 45). In this case, you need to
tell the receiver what equipment is hooked up
to which terminal so the buttons on the remote
control correspond to the components you’ve
connected.
1
Switch on the receiver and your TV.
Use
RECEIVER
to switch on.
2
Press
on the remote control,
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
///
and
ENTER
to navigate through the screens and
select menu items. Press
RETURN
to confirm
and exit the current menu.
3
Select ‘System Setup’ from the Home
Menu.
4
Select ‘Input Setup’ from the System
Setup menu.
5
Select the input function that you want to
set up.
The default names correspond with the names
next to the terminals on the rear panel (such as
DVD
) which, in turn, correspond with the
names on the remote control.
6
Select the input(s) to which you’ve
connected your component.
For example, if your DVD player only has an
optical output, you will need to change the
DVD
input function’s
Digital In
setting from
COAX-1
(default) to the optical input you’ve
connected it to.The numbering (
OPT-1
to
2
)
corresponds with the numbers beside the
inputs on the back of the receiver.
• If your component is connected via a
component video cable to an input
terminal other than the default, you must
tell the receiver which input terminal your
component is connected to, or else you
may see the composite video signals
instead of the component video signals.
1
7
When you’re finished, proceed to the
settings for other inputs.
There are optional settings in addition to the
assignment of the input jacks:
•
Input Name
– You can choose to rename
the input function for easier identification.
Select
Rename
to do so, or
Default
to
return to the system default.
RECEIVER
A/V RECEIVER
Exit
Return
a. Manual SP Setup
b. Input Setup
c. OSD Language
4.System Setup
d. Network Setup
e. Other Setup
4b.Input Setup
A/V RECEIVER
Exit
Finish
Input :
DVD
Input Name
:
Rename
Digital In
:
COAX-1
HDMI Input
:
- - -
Input Skip
:
OFF
Component In
:
Comp-1
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in
Setting the Video options
on page 72), you must connect your TV to this receiver using the same type of video cable as
you used to connect your video component.
VSX-1020_FLXCN.book 44 ページ ２０１０年４月１５日 木曜日 午後４時１０分
