−
19
−
English
CAUTION
• Make sure that the surface of the front windscreen is clean and dry before applying the tape.
• Firmly push the area around the LCD. Next, remove this product from the mounting bracket, directly
press the mounting bracket against the tape. In this way, the product can be firmly installed on the
windscreen.
• Never touch the surface of the LCD.
• Use extreme care as the double-sided tape on the mounting bracket is extremely strong, and it will be
difficult to reapply the tape once it has been applied.
• To ensure the installation strength of the adhesive tape, leave this product for 24 hours after application
before using it.
3 Install the 2nd camera (Only when installing the 2nd camera (sold separately)).
① :
Peel off the double-sided tape release paper from the 2nd camera (sold separately).
② :
Install in the specified position on the rear window so the image of the 2nd camera (sold
separately) is displayed horizontally with the flat surface shown in the figure (the
△
on the side
faces up) facing upwards.
Note
• You can use the dedicated app to display the 2nd camera’s (sold separately) image horizontally to
support installation.
→
“Exclusive App”
1
2
Install with the
flat surface facing
upwards.
Turn the lens towards the outside of the
vehicle and press down firmly so that the
image of the 2nd camera (sold separately)
is displayed horizontally.
CAUTION
• The rear camera image is not a mirrored view on the dash camera’s main unit screen. Please do
not use the rear camera image for purposes such as parking, changing lanes, or backing up your
vehicle.
