−
17
−
English
• Use extreme care as the double-sided tape on the mounting bracket is extremely strong, and it will be
difficult to reapply the tape once it has been applied.
• To ensure the installation strength of the adhesive tape, leave this product for 24 hours after application
before using it.
3 Install the 2nd camera.
① :
Peel off the double-sided tape release paper from the 2nd camera.
② :
With the flat part shown in the figure facing up (position where the
△
mark on the side is facing
up), install the 2nd camera at the specified position on the rear windscreen.
1
2
Install with the
flat surface facing
upwards.
Face the lens towards the outside of the
car and firmly push.
4 Connect the power cable, 2nd camera connection cable and AV cable to this
product.
2nd camera
2nd camera connection cable
Power cable
AV Cable
Main Unit
Notes
• Connecting the AV cable is only required if connecting the VREC-DZ700DC to a compatible stereo
with an AV Input.
