Listening to your system
06
30
En
Listening in stereo
When you select
STEREO
or
DIRECT
, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings).
Dolby Digital and DTS multichannel sources
are downmixed to stereo.
•
While listening to a source, press
STEREO
for stereo playback.
Press repeatedly to switch between:
•
STEREO
– The audio is heard with your
surround settings and you can still use the
Midnight, Loudness, and Tone functions.
•
DIRECT
– Bypass all effects and surround
settings so that the audio remains as close
to the source audio signal as possible.
1
•
AUTO SURR.
– See
Auto playback
on
page 28 for more on this.
Listening with Acoustic
Calibration EQ
• Default setting:
OFF
/
ALL CH
(after the
Auto MCACC Setup or EQ Auto Setting)
You can listen to sources using the Acoustic
Calibration Equalization set in
Automatically
setting up for surround sound (MCACC)
on
page 9 or
Acoustic Calibration EQ
on page 37.
Refer to these pages for more on Acoustic
Calibration Equalization.
•
While listening to a source, press
ACOUSTIC EQ.
Press repeatedly to select between:
•
ALL CH
– No special weighting is given to
any one channel.
•
F. ALIGN
– All speakers are heard in
accordance with the front speaker
settings.
•
CUSTOM 1/2
– Custom settings
•
EQ OFF
– Switches Acoustic Calibration
EQ off.
The MCACC indicator on the front panel lights
when Acoustic Calibration EQ is active.
2
Center
Image
b
(Applicable
only when
using a cen-
ter speaker)
Adjusts the center image to
create a wider stereo effect with
vocals. Adjust the effect from
0
(all center channel sent to front
right and left speakers) to
10
(center channel sent to the
center speaker only).
0 to 10
Default:
3
Effect
Sets the effect level for the
currently selected Advanced
Surround mode (each mode
can be set separately).
10 to 90
a Only available with 2ch sources in Dolby Pro Logic IIx Mu-
sic mode (also available with
2
Pro Logic II
5.1sound).
b Only available with 2ch sources in Neo:6 Music mode.
Note
1 If you switch on Midnight listening, Loudness, Dialog Enhancement, the Sound Retriever or the tone controls when
DIRECT
is selected, the receiver automatically switches to
STEREO
.
Setting
What it does
Options
AUTO SURR
STANDARD ADV.SURR
STEREO
2 • You can’t use Acoustic Calibration EQ with
DVD 5.1ch
, WMA9 Pro or XM Surround, and it has no effect with headphones.
• If you switch on Acoustic Calibration EQ when
DIRECT
is selected, the receiver automatically switches to
STEREO
.
S.RETRIEVER
SIGNAL SEL
DIALOG E
C /C S
ACOUSTIC EQ
05_playing_sources.fm 30 ページ ２００５年１２月１４日 水曜日 午後３時１２分
