Pioneer TAD-R1, Руководство по обслуживанию

Страница: 10 / 17

TAD-R1
10
1 2 3 4
1 2 3 4
C
D
F
A
B
E
3.5 ACOUSTIC ABSORBENT
• SPEAKER SYSTEM Parts List
8
5
5
7
7
6
13
4
10
1
3
7
9 (x8)
10
11
2
15
12
14
Acoustic absorbent
Roll the two acoustic absorbent sheets
together. Make two rolls. Push the rolls
vertically into the two holes of the
reinforcing plate from the bottom.
(Inside) (Outside)
Cover the whole reflector with the
acoustic absorbent sheet
(triangular shape).
Fold the acoustic absorbent sheet
into four so that it forms a triangle
and fully push it into the head.
Push the acoustic absorbent
sheet lightly from the opening
of the CST unit.
Holes on the rear panel
of the cabinet
Bend the acoustic absorbent sheet into an L-shape and
place it at the corner between the rear plate and the
bottom plate. Be careful not to let the sheet cover the duct.
Adhere the acoustic absorbent sheet to the
side panels with hot-melt adhesive.
Be careful not to let the acoustic
absorbent sheet cover the duct.
1-3
Insert the acoustic absorbent sheets between two reinforcing
plates and place them along the side plates.
Fold the acoustic absorbent sheet into two
so that it forms a triangle then adhere it with
hot-melt adhesive. Make eight triangles.
Secure them at the four corners of the
openings of the woofers.
Adhere the acoustic absorbent sheet to
the underside of the top reinforcing plate
with hot-melt adhesive. Align two slashes
of the sheet with the holes on the plate.
Roll the acoustic absorbent sheets.
Make two rolls. Push them onto the
front side at the corners between the
reinforcing plate and the side plates.
10, 11
Twist the acoustic absorbent sheets
around the designated parts of the
reinforcing plates and tie them with
the banding bands.
Fold the acoustic absorbent sheet into
four and roll it. Make two rolls. Then push
them into both sides of the chamber.
Area for the LPF NW Assy
Place the acoustic absorbent
sheets along the bottom and
side plates of the chamber.
Place the acoustic absorbent sheet
along the curve of the upper plate
of the head. Pull the sheet toward
you and drape it over the rear side
of the baffle.
Mark No. Description Part No.
NSP 1 Acoustic Absorbent (A : NW) SMT1342
NSP 2 Acoustic Absorbent (B : CORD) SMT1343
NSP 3 Acoustic Absorbent (C) SMT1344
NSP 4 Acoustic Absorbent (D : CST) SMT1345
NSP 5 Acoustic Absorbent (CST) SMT1346
NSP 6 Acoustic Absorbent (D : CST) SMT1351
NSP 7 Acoustic Absorbent SMV2232
(CST/Cab Bottom)
NSP 8 Acoustic Absorbent (CST Side) SMV2233
NSP 9 Acoustic Absorbent (WF Corner)SMV2234
NSP 10 Acoustic Absorbent (Cab) SMV2235
NSP 11 Acoustic Absorbent (Cab) SMV2236
NSP 12 Acoustic Absorbent (Cab CST Under)SMV2237
NSP 13 Acoustic Absorbent (SCT Rear) SMV2238
NSP 14 Acoustic Absorbent SMV2240
NSP 15 Wire Tie 300mm SEP6024
Mark No. Description Part No.