49
> Install
> Playback
Advanced Setup | Firmware Update |
E
N
∫
Linked operation
There is no linked operation with CEC compliant
devices, such as a TV
0
In the Home of the unit, set "System Setup" - "Hardware"
- "HDMI" - "HDMI CEC" to "On".
0
It is also necessary to set HDMI linking on the CEC
compliant device. Check the instruction manual.
0
When connecting a Sharp brand player or recorder by
HDMI, set "Hardware" - "HDMI" - "HDMI Standby
Through" to "Auto" in the System Setup menu.
∫
FM broadcasts
Radio reception is poor or there is a lot of noise.
0
Re-check the antenna connection.
0
Move the antenna away from the speaker cable or the
power cord.
0
Move the unit away from your TV or PC.
0
Passing cars and airplanes can cause interference.
0
Concrete walls weaken radio signals.
0
Listen to the station in mono.
0
FM reception may become clearer if you use the antenna
jack on the wall used for the TV.
∫
BLUETOOTH function
0
Try plugging/unplugging the power of the unit and try
turning on/off the BLUETOOTH enabled device.
Restarting the BLUETOOTH enabled device may be
effective.
0
The BLUETOOTH enabled devices must support the
A2DP profile.
0
Near components such as microwave oven or cordless
phone, which use the radio wave in the 2.4GHz range, a
radio wave interference may occur, which disables the
use of this unit.
0
If there is a metallic object near the unit, BLUETOOTH
connection may not be possible as the metal can effect
on the radio waves.
Check the following if the above does not fix the problem:
Cannot connect with this unit
0
Check that the BLUETOOTH function of the
BLUETOOTH enabled device is enabled.
Music playback is unavailable on the unit even after
successful BLUETOOTH connection
0
When the audio volume of your BLUETOOTH enabled
device is set low, the playback of audio may be
unavailable. Turn up the volume on the BLUETOOTH
enabled device.
0
Some BLUETOOTH enabled devices may be equipped
with a Send/Receive selector switch. Select Send mode.
0
Depending on the characteristics or specifications of your
BLUETOOTH enabled device, playback on this unit may
not be possible.
Sound is interrupted
0
There may be a problem with the BLUETOOTH enabled
device. Check the information on the internet.
The audio quality is poor after connection with a
BLUETOOTH enabled device
0
The BLUETOOTH reception is poor. Move the
BLUETOOTH enabled device closer to the unit or
remove any obstacle between the BLUETOOTH enabled
device and this unit.
∫
Network function
0
If you cannot select a network service, it will become
selectable when the network function is started. It may
take about a minute to start up.
0
When NET is blinking, this unit is not properly connected
to the home network.
0
Try plugging/unplugging the power supply of this unit and
the router, and try rebooting the router.
0
If the desired wireless LAN router is not in the access
point list, it may be set to hide SSID or the ANY
connection may be off. Change the setting and try again.
Check the following if the above does not fix the problem:
Cannot access the Internet radio
0
Certain network service or contents available through the
unit may not be accessible in case the service provider
terminates its service.
0
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
0
Make sure that the LAN side port on the router is properly
connected to this unit.
0
Make sure that connecting to Internet from other
components is possible. If connecting is not possible,
turn off all components connected to the network, wait for
a while, and then turn on the components again.
0
If a specific radio station is unavailable for listening, make
sure the registered URL is correct, or whether the format
distributed from the radio station is supported by this unit.
0
Depending on ISP, setting the proxy server is necessary.
0
Make sure that the used router and/or modem is
supported by your ISP.
Cannot access the network server
0
This unit needs to be connected to the same router as
the network server.
0
This unit is compatible with Windows Media
®
Player 11 or
12 network servers or NAS that are compatible with
home network functionality.
0
You may need to make some settings on Windows
Media
®
Player. (
0
When using a PC, only music files registered in the
Windows Media
®
Player library can be played.
