
Black plate (65,1)
<CRB2123-A/U>65
2 Press
m
or
n
to switch the down
mix settings.
!
Lt/Rt
Down mix so that the surround
components can be restored (decoded).
!
Lo/Ro
Stereo mix the original audio that
do not contain channel modes such as sur-
round components.
Using the Dolby Pro Logic II
Only when the multi-channel processor (e.g.,
DEQ-P7650) is connected to this unit, you can
operate this function.
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
!
If both the center and the rear speakers are
set to
OFF
, you cannot use this function.
!
Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1 Press and hold EQ-EX until PLII appears
in the display.
2 Press EQ-EX to select the desired mode.
!
MOV (movie)
The Movie mode suitable
for movie playback
!
MUS (music)
The Music mode suitable
for music playback
!
MAT (matrix)
The Matrix mode for when
FM radio reception is weak
!
PLII
:
OFF
Turn Dolby Pro Logic II off
#
You can adjust the music mode only when
MUS (music)
has been selected.
#
To cancel Dolby Pro Logic II, press
EQ-EX
again to select
PLII
:
OFF
.
Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
!
Panorama (
PANO
) extends the front stereo
image to include the surround speakers for
an exciting
wraparound
effect.
!
Dimension (
DIME
) allows you to gradually
adjust the sound field either towards the
front or the rear.
!
Center Width Control (
CENT
) allows center-
channel sounds to be positioned between
the center speaker and the left/right speak-
ers. It improves the left-center-right stage
presentation for both the driver and the
front passenger.
1 Press EQ-EX until MUS (music) appears
in the display.
2 Press
n
to select PANO.
Press
r
or
q
to turn
PANO
on/off.
3 Press
n
again to select DIME.
Each time you press
r
or
q
it moves the
sound towards the front or the surrounds.
+3
3
is displayed as the front/surround
speaker balance moves from front to sur-
rounds.
4 Press
n
again to select CENT.
Each time you press
r
or
q
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0
7
.
3
is the default and it
s recommended for
most recordings.
0
places all center sound in
the center speaker.
7
places all center sound
equally in the left/right speakers.
Digital Signal Processor
En
65
Section
12
Digital
Signal
Proce
ssor