Black plate (63,1)
<CRB2123-A/U>63
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Press A to select POSI.
Press
A
until
POSI
appears in the display.
2 Press
m
/
n
/
r
/
q
to select alisten-
ing position.
Press one of these,
m
/
n
/
r
/
q
, to select
a listening position as listed in the table.
Button
Display
Position
m
F/L
Front seat left
n
F/R
Front seat right
r
FRT
Front seats
q
ALL
All seats
#
To cancel the selected listening position,
press the same button again.
Note
When you make adjustments for listening posi-
tion, the speakers are automatically set for appro-
priate output levels. You can tailor them if you
want as discussed under the heading of
Adjust-
ing the speaker output levels using a test tone
or
Adjusting the speaker output levels
.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press A to select FAD.
Press
A
until
FAD
appears in the display.
#
If the balance setting has been previously ad-
justed,
BAL
will be displayed.
2 Press
r
or
q
to adjust front/rear
speaker balance.
Each press of
r
or
q
moves the front/rear
speaker balance towards the front or the rear.
FAD :F25
FAD :R25
is displayed as the front/
rear speaker balance moves from front to rear.
#
FAD : 0
is the proper setting when only two
speakers are used.
3 Press
m
or
n
to adjust left/right
speaker balance.
When you press
m
or
n
,
BAL : 0
is dis-
played. Each press of
m
or
n
moves the
left/right speaker balance towards the left or
the right.
BAL :L25
BAL :R25
is displayed as the left/
right speaker balance moves from left to
right.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
Digital Signal Processor
En
63
Section
12
Digital
Signal
Proce
ssor
