Pioneer Super Tuner III D DEH-1050E, Руководство по эксплуатации

Страница: 6 / 56

Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Press FUNCTION to select LOCAL.
2 Press
a
or
b
to turn local seek tuning
on or off.
3 Press
c
or
d
to set the sensitivity.
FM: LOCAL 1
—
LOCAL 2
—
LOCAL 3
—
LOCAL 4
AM: LOCAL 1
—
LOCAL 2
The LOCAL 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons
1
to
6
.
Once stored you can tune in to those frequen-
cies with the touch of button.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons
1 to 6 .
1 Press FUNCTION to select BSM.
2 Press
a
to turn BSM on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
#
To cancel the storage process, press
b
.
Built-in Player
Playing a disc
1 Insert a CD into the CD loading slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD by pressing EJECT .
2 To perform fast forward or reverse,
press and hold
c
or
d
.
3 To skip back or forward to another
track, press
c
or
d
.
Notes
!
Read the precautions with discs and player on
page 10.
!
If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 10.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select RPT.
2 Press
c
or
d
to select the repeat range.
DSC
–
Repeat all tracks
TRK
–
Repeat just the current track
#
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
#
To return to the normal display, press BAND .
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
2 Press
a
or
b
to turn random play on or
off.
When random play is on,
RDM
appears in the
display.
#
To return to the normal display, press BAND .
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select SCAN.
Operating this unit
En
6
Section
02